[PATCH 3/8] media: dvb-frontends: mn88472: convert to i2c_new_dummy_device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/media/dvb-frontends/mn88472.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb-frontends/mn88472.c b/drivers/media/dvb-frontends/mn88472.c
index 731b44b9b74c..ef8094aa97df 100644
--- a/drivers/media/dvb-frontends/mn88472.c
+++ b/drivers/media/dvb-frontends/mn88472.c
@@ -612,9 +612,9 @@ static int mn88472_probe(struct i2c_client *client,
 	 * Also, register bank 2 do not support sequential I/O. Only single
 	 * register write or read is allowed to that bank.
 	 */
-	dev->client[1] = i2c_new_dummy(client->adapter, 0x1a);
-	if (!dev->client[1]) {
-		ret = -ENODEV;
+	dev->client[1] = i2c_new_dummy_device(client->adapter, 0x1a);
+	if (IS_ERR(dev->client[1])) {
+		ret = PTR_ERR(dev->client[1]);
 		dev_err(&client->dev, "I2C registration failed\n");
 		if (ret)
 			goto err_regmap_0_regmap_exit;
@@ -626,9 +626,9 @@ static int mn88472_probe(struct i2c_client *client,
 	}
 	i2c_set_clientdata(dev->client[1], dev);
 
-	dev->client[2] = i2c_new_dummy(client->adapter, 0x1c);
-	if (!dev->client[2]) {
-		ret = -ENODEV;
+	dev->client[2] = i2c_new_dummy_device(client->adapter, 0x1c);
+	if (IS_ERR(dev->client[2])) {
+		ret = PTR_ERR(dev->client[2]);
 		dev_err(&client->dev, "2nd I2C registration failed\n");
 		if (ret)
 			goto err_regmap_1_regmap_exit;
-- 
2.20.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux