Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
drivers/mfd/bcm590xx.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c
index 1aeb5e498d91..bfac5dc091ca 100644
--- a/drivers/mfd/bcm590xx.c
+++ b/drivers/mfd/bcm590xx.c
@@ -61,11 +61,11 @@ static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri,
}
/* Secondary I2C slave address is the base address with A(2) asserted */
- bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter,
+ bcm590xx->i2c_sec = i2c_new_dummy_device(i2c_pri->adapter,
i2c_pri->addr | BIT(2));
- if (!bcm590xx->i2c_sec) {
+ if (IS_ERR(bcm590xx->i2c_sec)) {
dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n");
- return -ENODEV;
+ return PTR_ERR(bcm590xx->i2c_sec);
}
i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx);
--
2.20.1
