Move from i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Only build tested. Part of a tree-wide move to deprecate
i2c_new_dummy().
drivers/net/ethernet/sfc/falcon/falcon_boards.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/sfc/falcon/falcon_boards.c b/drivers/net/ethernet/sfc/falcon/falcon_boards.c
index 839189dab98e..189ce9b9dfa7 100644
--- a/drivers/net/ethernet/sfc/falcon/falcon_boards.c
+++ b/drivers/net/ethernet/sfc/falcon/falcon_boards.c
@@ -454,13 +454,13 @@ static int sfe4001_init(struct ef4_nic *efx)
#if IS_ENABLED(CONFIG_SENSORS_LM90)
board->hwmon_client =
- i2c_new_device(&board->i2c_adap, &sfe4001_hwmon_info);
+ i2c_new_client_device(&board->i2c_adap, &sfe4001_hwmon_info);
#else
board->hwmon_client =
- i2c_new_dummy(&board->i2c_adap, sfe4001_hwmon_info.addr);
+ i2c_new_dummy_device(&board->i2c_adap, sfe4001_hwmon_info.addr);
#endif
- if (!board->hwmon_client)
- return -EIO;
+ if (IS_ERR(board->hwmon_client))
+ return PTR_ERR(board->hwmon_client);
/* Raise board/PHY high limit from 85 to 90 degrees Celsius */
rc = i2c_smbus_write_byte_data(board->hwmon_client,
@@ -468,9 +468,9 @@ static int sfe4001_init(struct ef4_nic *efx)
if (rc)
goto fail_hwmon;
- board->ioexp_client = i2c_new_dummy(&board->i2c_adap, PCA9539);
- if (!board->ioexp_client) {
- rc = -EIO;
+ board->ioexp_client = i2c_new_dummy_device(&board->i2c_adap, PCA9539);
+ if (IS_ERR(board->ioexp_client)) {
+ rc = PTR_ERR(board->ioexp_client);
goto fail_hwmon;
}
--
2.20.1
