Hi I looks good to me Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx> Thx On 6/26/19 3:45 PM, Wolfram Sang wrote: > On Tue, Jun 04, 2019 at 03:20:51PM +0200, Fabrice Gasnier wrote: >> This patch adds the support of I2C_SMBUS_I2C_BLOCK_DATA transaction type >> for the stm32f7 SMBUS Controller. >> Use emulated I2C_SMBUS_I2C_BLOCK_DATA transactions as there is no specific >> hardware in STM32 I2C to manage this (e.g. like no need for PEC here). >> Emulated transfer will fall back calling i2c transfer method where there's >> already support for DMAs for example. >> So, use the I2C_FUNC_SMBUS_I2C_BLOCK in stm32f7_i2c_func(), and rely on >> emulated transfer by returning -EOPNOTSUPP in the smbus_xfer() routine >> for such a case. >> >> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx> > > Maintainers? > >> --- >> drivers/i2c/busses/i2c-stm32f7.c | 6 +++++- >> 1 file changed, 5 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c >> index 48337be..68a751e 100644 >> --- a/drivers/i2c/busses/i2c-stm32f7.c >> +++ b/drivers/i2c/busses/i2c-stm32f7.c >> @@ -953,6 +953,9 @@ static int stm32f7_i2c_smbus_xfer_msg(struct stm32f7_i2c_dev *i2c_dev, >> cr2 &= ~STM32F7_I2C_CR2_RD_WRN; >> f7_msg->read_write = I2C_SMBUS_READ; >> break; >> + case I2C_SMBUS_I2C_BLOCK_DATA: >> + /* Rely on emulated i2c transfer (through master_xfer) */ >> + return -EOPNOTSUPP; >> default: >> dev_err(dev, "Unsupported smbus protocol %d\n", f7_msg->size); >> return -EOPNOTSUPP; >> @@ -1803,7 +1806,8 @@ static u32 stm32f7_i2c_func(struct i2c_adapter *adap) >> I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | >> I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | >> I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | >> - I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC; >> + I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC | >> + I2C_FUNC_SMBUS_I2C_BLOCK; >> } >> >> static struct i2c_algorithm stm32f7_i2c_algo = { >> -- >> 2.7.4 >>