Re: [PATCHv4] i2c: cadence: Fix the hold bit setting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 23, 2019 at 10:51:58AM +0530, shubhrajyoti.datta@xxxxxxxxx wrote:
> From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
> 
> In case the hold bit is not needed we are carring the old values
> fix the same by resetting the bit when not needed.

Typo: s/carring/carrying/. Also missing a period after "values."

> 
> Fixes the sporadic i2c bus lockups on National Instruments
> Zynq-based devices.
> 
> Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
> Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>
> Reported-and-tested-by: Kyle Roeschley <kyle.roeschley@xxxxxx>
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
> ---
> v4:
> update fixes tag
> v3:
> Add fixes and Ack
> v2:
> Update commit log
> Also check if the hold_flag
> 
>  drivers/i2c/busses/i2c-cadence.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
> index b136057..b2b3df1 100644
> --- a/drivers/i2c/busses/i2c-cadence.c
> +++ b/drivers/i2c/busses/i2c-cadence.c
> @@ -382,8 +382,10 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
>  	 * Check for the message size against FIFO depth and set the
>  	 * 'hold bus' bit if it is greater than FIFO depth.
>  	 */
> -	if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
> +	if (id->recv_count > CDNS_I2C_FIFO_DEPTH  || id->bus_hold_flag)
>  		ctrl_reg |= CDNS_I2C_CR_HOLD;
> +	else
> +		ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
>  
>  	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
>  
> @@ -440,8 +442,11 @@ static void cdns_i2c_msend(struct cdns_i2c *id)
>  	 * Check for the message size against FIFO depth and set the
>  	 * 'hold bus' bit if it is greater than FIFO depth.
>  	 */
> -	if (id->send_count > CDNS_I2C_FIFO_DEPTH)
> +	if (id->recv_count > CDNS_I2C_FIFO_DEPTH  || id->bus_hold_flag)

This should be checking send_count, not recv_count.

>  		ctrl_reg |= CDNS_I2C_CR_HOLD;
> +	else
> +		ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
> +
>  	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
>  
>  	/* Clear the interrupts in interrupt status register. */

-- 
Kyle Roeschley
Software Engineer
National Instruments




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux