Re: [PATCH v1 3/6] i2c: designware: Get rid of fp_str temporary variable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 25/07/2018 17:39:27+0300, Andy Shevchenko wrote:
> There is better for debug purposes, easy to grep, and for reader to see
> what speed we configure, if we use full name of the mode in case of Fast
> Plus one. As a side effect we may get rid of temporary variable.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-designware-master.c | 20 ++++++++++++++------
>  1 file changed, 14 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
> index eec038624b37..690eb607eda8 100644
> --- a/drivers/i2c/busses/i2c-designware-master.c
> +++ b/drivers/i2c/busses/i2c-designware-master.c
> @@ -48,7 +48,7 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
>  static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
>  {
>  	u32 ic_clk = i2c_dw_clk_rate(dev);
> -	const char *mode_str, *fp_str = "";
> +	const char *mode_str;
>  	u32 comp_param1;
>  	u32 sda_falling_time, scl_falling_time;
>  	struct i2c_timings *t = &dev->timings;
> @@ -94,7 +94,6 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
>  		if (dev->fp_hcnt && dev->fp_lcnt) {
>  			dev->fs_hcnt = dev->fp_hcnt;
>  			dev->fs_lcnt = dev->fp_lcnt;
> -			fp_str = " Plus";
>  		}
>  	}
>  	/*
> @@ -114,8 +113,13 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
>  					scl_falling_time,
>  					0);	/* No offset */
>  	}
> -	dev_dbg(dev->dev, "Fast Mode%s HCNT:LCNT = %d:%d\n",
> -		fp_str, dev->fs_hcnt, dev->fs_lcnt);
> +	if (dev->fp_hcnt && dev->fp_lcnt) {
> +		dev_dbg(dev->dev, "Fast Mode Plus HCNT:LCNT = %d:%d\n",
> +			dev->fs_hcnt, dev->fs_lcnt);
> +	} else {
> +		dev_dbg(dev->dev, "Fast Mode HCNT:LCNT = %d:%d\n",
> +			dev->fs_hcnt, dev->fs_lcnt);
> +	}

As this duplicates strings, I'm pretty sure Wolfram doesn't like that:
https://events.static.linuxfound.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf

;)

>  
>  	/* Check is high speed possible and fall back to fast mode if not */
>  	if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
> @@ -145,9 +149,13 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
>  		mode_str = "High Speed Mode";
>  		break;
>  	default:
> -		mode_str = "Fast Mode";
> +		if (dev->fp_hcnt && dev->fp_lcnt)
> +			mode_str = "Fast Mode Plus";
> +		else
> +			mode_str = "Fast Mode";
> +		break;
>  	}
> -	dev_dbg(dev->dev, "Bus speed: %s%s\n", mode_str, fp_str);
> +	dev_dbg(dev->dev, "Bus speed: %s\n", mode_str);
>  
>  out:
>  	return ret;
> -- 
> 2.18.0
> 

-- 
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux