And don't reimplement in the driver.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Only build tested.
drivers/i2c/busses/i2c-stu300.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index fce52bdab2b7..5503fa171df0 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -673,12 +673,6 @@ static int stu300_xfer_msg(struct i2c_adapter *adap,
msg->addr, msg->len, msg->flags, stop);
}
- /* Zero-length messages are not supported by this hardware */
- if (msg->len == 0) {
- ret = -EINVAL;
- goto exit_disable;
- }
-
/*
* For some reason, sending the address sometimes fails when running
* on the 13 MHz clock. No interrupt arrives. This is a work around,
@@ -863,6 +857,10 @@ static const struct i2c_algorithm stu300_algo = {
.functionality = stu300_func,
};
+static const struct i2c_adapter_quirks stu300_quirks = {
+ .flags = I2C_AQ_NO_ZERO_LEN,
+};
+
static int stu300_probe(struct platform_device *pdev)
{
struct stu300_dev *dev;
@@ -920,6 +918,8 @@ static int stu300_probe(struct platform_device *pdev)
adap->algo = &stu300_algo;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
+ adap->quirks = &stu300_quirks;
+
i2c_set_adapdata(adap, dev);
/* i2c device drivers may be active on return from add_adapter() */
--
2.11.0
