On 18 July 2018 at 01:00, Eddie James <eajames@xxxxxxxxxxxxxxxxxx> wrote: > This series adds an algorithm for an I2C master physically located on an FSI > slave device. The I2C master has multiple ports, each of which may be connected > to an I2C slave. Access to the I2C master registers is achieved over FSI bus. > > Due to the multi-port nature of the I2C master, the driver instantiates a new > I2C adapter for each port connected to a slave. The connected ports should be > defined in the device tree under the I2C master device. I gave this a run on a Romulus P9 system, and dumped the SBE using it. All seemed well. Tested-by: Joel Stanley <joel@xxxxxxxxx> Cheers, Joel
