From: "eajames@xxxxxxxxxxxxxxxxxx" <eajames@xxxxxxxxxxxxxxxxxx>
Execute I2C transfers from the FSI-attached I2C master. Use polling
instead of interrupts as we have no hardware IRQ over FSI.
Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
---
drivers/i2c/busses/i2c-fsi.c | 195 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 193 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index 0f0bc88..45a6ebd 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -155,6 +155,7 @@ struct fsi_i2c_port {
struct i2c_adapter adapter;
struct fsi_i2c_master *master;
u16 port;
+ u16 xfrd;
};
static int fsi_i2c_read_reg(struct fsi_device *fsi, unsigned int reg,
@@ -230,6 +231,99 @@ static int fsi_i2c_set_port(struct fsi_i2c_port *port)
return fsi_i2c_write_reg(fsi, I2C_FSI_RESET_ERR, &dummy);
}
+static int fsi_i2c_start(struct fsi_i2c_port *port, struct i2c_msg *msg,
+ bool stop)
+{
+ struct fsi_i2c_master *i2c = port->master;
+ u32 cmd = I2C_CMD_WITH_START | I2C_CMD_WITH_ADDR;
+
+ port->xfrd = 0;
+
+ if (msg->flags & I2C_M_RD)
+ cmd |= I2C_CMD_READ;
+
+ if (stop || msg->flags & I2C_M_STOP)
+ cmd |= I2C_CMD_WITH_STOP;
+
+ cmd |= FIELD_PREP(I2C_CMD_ADDR, msg->addr);
+ cmd |= FIELD_PREP(I2C_CMD_LEN, msg->len);
+
+ return fsi_i2c_write_reg(i2c->fsi, I2C_FSI_CMD, &cmd);
+}
+
+static int fsi_i2c_get_op_bytes(int op_bytes)
+{
+ /* fsi is limited to max 4 byte aligned ops */
+ if (op_bytes > 4)
+ return 4;
+ else if (op_bytes == 3)
+ return 2;
+ return op_bytes;
+}
+
+static int fsi_i2c_write_fifo(struct fsi_i2c_port *port, struct i2c_msg *msg,
+ u8 fifo_count)
+{
+ int write;
+ int rc;
+ struct fsi_i2c_master *i2c = port->master;
+ int bytes_to_write = i2c->fifo_size - fifo_count;
+ int bytes_remaining = msg->len - port->xfrd;
+
+ bytes_to_write = min(bytes_to_write, bytes_remaining);
+
+ while (bytes_to_write) {
+ write = fsi_i2c_get_op_bytes(bytes_to_write);
+
+ rc = fsi_device_write(i2c->fsi, I2C_FSI_FIFO,
+ &msg->buf[port->xfrd], write);
+ if (rc)
+ return rc;
+
+ port->xfrd += write;
+ bytes_to_write -= write;
+ }
+
+ return 0;
+}
+
+static int fsi_i2c_read_fifo(struct fsi_i2c_port *port, struct i2c_msg *msg,
+ u8 fifo_count)
+{
+ int read;
+ int rc;
+ struct fsi_i2c_master *i2c = port->master;
+ int bytes_to_read;
+ int xfr_remaining = msg->len - port->xfrd;
+ u32 dummy;
+
+ bytes_to_read = min_t(int, fifo_count, xfr_remaining);
+
+ while (bytes_to_read) {
+ read = fsi_i2c_get_op_bytes(bytes_to_read);
+
+ if (xfr_remaining) {
+ rc = fsi_device_read(i2c->fsi, I2C_FSI_FIFO,
+ &msg->buf[port->xfrd], read);
+ if (rc)
+ return rc;
+
+ port->xfrd += read;
+ xfr_remaining -= read;
+ } else {
+ /* no more buffer but data in fifo, need to clear it */
+ rc = fsi_device_read(i2c->fsi, I2C_FSI_FIFO, &dummy,
+ read);
+ if (rc)
+ return rc;
+ }
+
+ bytes_to_read -= read;
+ }
+
+ return 0;
+}
+
static int fsi_i2c_reset_engine(struct fsi_i2c_master *i2c, u16 port)
{
int rc;
@@ -305,17 +399,114 @@ static int fsi_i2c_abort(struct fsi_i2c_port *port, u32 status)
return -ETIMEDOUT;
}
+static int fsi_i2c_handle_status(struct fsi_i2c_port *port,
+ struct i2c_msg *msg, u32 status)
+{
+ int rc;
+ u8 fifo_count;
+
+ if (status & I2C_STAT_ERR) {
+ rc = fsi_i2c_abort(port, status);
+ if (rc)
+ return rc;
+
+ if (status & I2C_STAT_INV_CMD)
+ return -EINVAL;
+
+ if (status & (I2C_STAT_PARITY | I2C_STAT_BE_OVERRUN |
+ I2C_STAT_BE_ACCESS))
+ return -EPROTO;
+
+ if (status & I2C_STAT_NACK)
+ return -ENXIO;
+
+ if (status & I2C_STAT_LOST_ARB)
+ return -EAGAIN;
+
+ if (status & I2C_STAT_STOP_ERR)
+ return -EBADMSG;
+
+ return -EIO;
+ }
+
+ if (status & I2C_STAT_DAT_REQ) {
+ fifo_count = FIELD_GET(I2C_STAT_FIFO_COUNT, status);
+
+ if (msg->flags & I2C_M_RD)
+ return fsi_i2c_read_fifo(port, msg, fifo_count);
+
+ return fsi_i2c_write_fifo(port, msg, fifo_count);
+ }
+
+ if (status & I2C_STAT_CMD_COMP) {
+ if (port->xfrd < msg->len)
+ return -ENODATA;
+
+ return msg->len;
+ }
+
+ return 0;
+}
+
+static int fsi_i2c_wait(struct fsi_i2c_port *port, struct i2c_msg *msg,
+ unsigned long timeout)
+{
+ u32 status = 0;
+ int rc;
+ unsigned long start = jiffies;
+
+ do {
+ rc = fsi_i2c_read_reg(port->master->fsi, I2C_FSI_STAT,
+ &status);
+ if (rc)
+ return rc;
+
+ if (status & I2C_STAT_ANY_RESP) {
+ rc = fsi_i2c_handle_status(port, msg, status);
+ if (rc < 0)
+ return rc;
+
+ /* cmd complete and all data xfrd */
+ if (rc == msg->len)
+ return 0;
+
+ /* need to xfr more data, but maybe don't need wait */
+ continue;
+ }
+
+ usleep_range(I2C_CMD_SLEEP_MIN_US, I2C_CMD_SLEEP_MAX_US);
+ } while (time_after(start + timeout, jiffies));
+
+ return -ETIMEDOUT;
+}
+
static int fsi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num)
{
- int rc;
+ int i, rc;
+ unsigned long start_time;
struct fsi_i2c_port *port = adap->algo_data;
+ struct i2c_msg *msg;
rc = fsi_i2c_set_port(port);
if (rc)
return rc;
- return -EOPNOTSUPP;
+ for (i = 0; i < num; i++) {
+ msg = msgs + i;
+ start_time = jiffies;
+
+ rc = fsi_i2c_start(port, msg, i == num - 1);
+ if (rc)
+ return rc;
+
+ rc = fsi_i2c_wait(port, msg,
+ adap->timeout - (jiffies - start_time));
+ if (rc)
+ return rc;
+ }
+
+ return num;
}
static u32 fsi_i2c_functionality(struct i2c_adapter *adap)
--
1.8.3.1
