On 7/10/2018 10:42 PM, Brendan Higgins wrote:
On Mon, Jul 2, 2018 at 2:14 PM Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx> wrote:There are some log printing without a newline character. This patch adds the missing newline characters. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-aspeed.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 60e4d0e939a3..e3007c1c4ac5 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -407,7 +407,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus) */ ret = aspeed_i2c_is_irq_error(irq_status); if (ret < 0) { - dev_dbg(bus->dev, "received error interrupt: 0x%08x", + dev_dbg(bus->dev, "received error interrupt: 0x%08x\n", irq_status); bus->cmd_err = ret; bus->master_state = ASPEED_I2C_MASTER_INACTIVE; @@ -416,7 +416,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus) /* We are in an invalid state; reset bus to a known state. */ if (!bus->msgs) { - dev_err(bus->dev, "bus in unknown state"); + dev_err(bus->dev, "bus in unknown state\n"); bus->cmd_err = -EIO; if (bus->master_state != ASPEED_I2C_MASTER_STOP) aspeed_i2c_do_stop(bus); @@ -431,7 +431,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus) */ if (bus->master_state == ASPEED_I2C_MASTER_START) { if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { - pr_devel("no slave present at %02x", msg->addr); + pr_devel("no slave present at %02x\n", msg->addr);Unless something changed in the last couple versions of the kernel, this is the only line that actually changes anything. dev_* inserts a newline for every call. Admittedly, the rest of the file is pretty inconsistent, so if you really want to make all these changes, I don't feel super strongly about it.
Agreed. Will drop this patch. Thanks, Jae
status_ack |= ASPEED_I2CD_INTR_TX_NAK; bus->cmd_err = -ENXIO; aspeed_i2c_do_stop(bus); @@ -451,11 +451,11 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus) switch (bus->master_state) { case ASPEED_I2C_MASTER_TX: if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) { - dev_dbg(bus->dev, "slave NACKed TX"); + dev_dbg(bus->dev, "slave NACKed TX\n"); status_ack |= ASPEED_I2CD_INTR_TX_NAK; goto error_and_stop; } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { - dev_err(bus->dev, "slave failed to ACK TX"); + dev_err(bus->dev, "slave failed to ACK TX\n"); goto error_and_stop; } status_ack |= ASPEED_I2CD_INTR_TX_ACK; @@ -478,7 +478,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus) /* fallthrough intended */ case ASPEED_I2C_MASTER_RX: if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) { - dev_err(bus->dev, "master failed to RX"); + dev_err(bus->dev, "master failed to RX\n"); goto error_and_stop; } status_ack |= ASPEED_I2CD_INTR_RX_DONE; @@ -509,7 +509,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus) goto out_no_complete; case ASPEED_I2C_MASTER_STOP: if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) { - dev_err(bus->dev, "master failed to STOP"); + dev_err(bus->dev, "master failed to STOP\n"); bus->cmd_err = -EIO; /* Do not STOP as we have already tried. */ } else { @@ -520,7 +520,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus) goto out_complete; case ASPEED_I2C_MASTER_INACTIVE: dev_err(bus->dev, - "master received interrupt 0x%08x, but is inactive", + "master received interrupt 0x%08x, but is inactive\n", irq_status); bus->cmd_err = -EIO; /* Do not STOP as we should be inactive. */ @@ -851,7 +851,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL); if (IS_ERR(bus->rst)) { dev_err(&pdev->dev, - "missing or invalid reset controller device tree entry"); + "missing or invalid reset controller device tree entry\n"); return PTR_ERR(bus->rst); } reset_control_deassert(bus->rst); -- 2.17.1Reviewed-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
