[PATCH 1/2] i2c: recovery: add get_bus_free callback

[Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>]

Some IP cores have an internal 'bus free' logic which may be more
advanced than just checking if SDA is high. Add a separate callback to
get this status. Filling it is optional.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/i2c-core-base.c | 27 +++++++++++++++++++++++----
 include/linux/i2c.h         |  3 +++
 2 files changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index c7995efd58ea..59f8dfc5be36 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -158,6 +158,22 @@ static void set_sda_gpio_value(struct i2c_adapter *adap, int val)
 	gpiod_set_value_cansleep(adap->bus_recovery_info->sda_gpiod, val);
 }
 
+static int i2c_generic_bus_free(struct i2c_adapter *adap)
+{
+	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+	int ret = -EOPNOTSUPP;
+
+	if (bri->get_bus_free)
+		ret = bri->get_bus_free(adap);
+	else if (bri->get_sda)
+		ret = bri->get_sda(adap);
+
+	if (ret < 0)
+		return ret;
+
+	return ret ? 0 : -EBUSY;
+}
+
 /*
  * We are generating clock pulses. ndelay() determines durating of clk pulses.
  * We will generate clock with rate 100 KHz and so duration of both clock levels
@@ -169,7 +185,7 @@ static void set_sda_gpio_value(struct i2c_adapter *adap, int val)
 int i2c_generic_scl_recovery(struct i2c_adapter *adap)
 {
 	struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
-	int i = 0, val = 1, ret = 0;
+	int i = 0, val = 1, ret;
 
 	if (bri->prepare_recovery)
 		bri->prepare_recovery(adap);
@@ -207,14 +223,17 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap)
 			bri->set_sda(adap, val);
 		ndelay(RECOVERY_NDELAY / 2);
 
-		/* Break if SDA is high */
-		if (val && bri->get_sda) {
-			ret = bri->get_sda(adap) ? 0 : -EBUSY;
+		if (val) {
+			ret = i2c_generic_bus_free(adap);
 			if (ret == 0)
 				break;
 		}
 	}
 
+	/* If we can't check bus status, assume recovery worked */
+	if (ret == -EOPNOTSUPP)
+		ret = 0;
+
 	if (bri->unprepare_recovery)
 		bri->unprepare_recovery(adap);
 
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 9d1818c56775..60e224428a85 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -587,6 +587,8 @@ struct i2c_timings {
  * @set_sda: This sets/clears the SDA line. This or get_sda() is mandatory for
  *	generic SCL recovery. Populated internally, if sda_gpio is a valid GPIO,
  *	for generic GPIO recovery.
+ * @get_bus_free: Returns the bus free state as seen from the IP core in case it
+ *	has a more complex internal logic than just reading SDA. Optional.
  * @prepare_recovery: This will be called before starting recovery. Platform may
  *	configure padmux here for SDA/SCL line or something else they want.
  * @unprepare_recovery: This will be called after completing recovery. Platform
@@ -601,6 +603,7 @@ struct i2c_bus_recovery_info {
 	void (*set_scl)(struct i2c_adapter *adap, int val);
 	int (*get_sda)(struct i2c_adapter *adap);
 	void (*set_sda)(struct i2c_adapter *adap, int val);
+	int (*get_bus_free)(struct i2c_adapter *adap);
 
 	void (*prepare_recovery)(struct i2c_adapter *adap);
 	void (*unprepare_recovery)(struct i2c_adapter *adap);
-- 
2.11.0