[PATCH] i2c: i2c-qcom-geni: Fix suspend clock handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



pm_runtime_suspended can return 0 even if the last runtime power
management function called in the device was a suspend call. This
trips up the i2c-qcom-geni's suspend_noirq accounting, which was
trying to use the function to determine if it should disable clocks
or if that had already been done.

The fix is to track whether or not clocks have been enabled explicitly
in the driver with a new member. While in there, also honor the return
value of geni_se_resources_off, which can technically fail.

An example of the warning generated during suspend:
[   68.314733] WARNING: CPU: 0 PID: 1990 at drivers/clk/clk.c:595 clk_core_disable+0x28/0x200
[   68.464576] Call trace:
[   68.554410] [<ffffff80083f0ed0>] clk_core_disable+0x28/0x200
[   68.560244] [<ffffff80083f349c>] clk_disable+0x38/0x4c
[   68.565541] [<ffffff8008408910>] geni_se_resources_off+0x40/0x74
[   68.571731] [<ffffff800862aadc>] geni_i2c_runtime_suspend+0x2c/0x3c
[   68.578185] [<ffffff800862ae6c>] geni_i2c_suspend_noirq+0x38/0x68
[   68.584475] [<ffffff800852bd40>] dpm_run_callback+0x104/0x210
[   68.590404] [<ffffff800852c3d4>] __device_suspend_noirq+0x158/0x1a8
[   68.596859] [<ffffff800852dff0>] dpm_noirq_suspend_devices+0x180/0x38c
[   68.603594] [<ffffff80080fdebc>] suspend_devices_and_enter+0x49c/0x964
[   68.610321] [<ffffff80080fea14>] pm_suspend+0x690/0x6e0
[   68.615712] [<ffffff80080fc930>] state_store+0xd4/0xf8
[   68.621014] [<ffffff80088a57f0>] kobj_attr_store+0x18/0x28
[   68.626672] [<ffffff8008297a54>] sysfs_kf_write+0x5c/0x68
[   68.632240] [<ffffff8008296a00>] kernfs_fop_write+0x174/0x1b8
[   68.638177] [<ffffff800821a2c4>] __vfs_write+0x58/0x160
[   68.643567] [<ffffff800821a5d8>] vfs_write+0xcc/0x184
[   68.648780] [<ffffff800821a850>] SyS_write+0x64/0xb4

Signed-off-by: Evan Green <evgreen@xxxxxxxxxxxx>
---
This change applies atop Karthik's patch [1], which as far as I can tell
technically hasn't landed yet, but also hasn't had feedback in awhile
either. I opted to submit this as a separate patch, but if the maintainers
prefer it's fine with me if this get folded in to another spin of the
base series.

[1] https://patchwork.kernel.org/patch/10460819/

 drivers/i2c/busses/i2c-qcom-geni.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 54bcd1a79cc5..90c4cbfa22d8 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -85,6 +85,7 @@ struct geni_i2c_dev {
 	spinlock_t lock;
 	u32 clk_freq_out;
 	const struct geni_i2c_clk_fld *clk_fld;
+	int suspended;
 };
 
 struct geni_i2c_err_log {
@@ -567,9 +568,15 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	geni_se_init(&gi2c->se, gi2c->tx_wm, tx_depth);
 	geni_se_config_packing(&gi2c->se, BITS_PER_BYTE, PACKING_BYTES_PW,
 							true, true, true);
-	geni_se_resources_off(&gi2c->se);
+	ret = geni_se_resources_off(&gi2c->se);
+	if (ret) {
+		dev_err(&pdev->dev, "Error turning off resources %d\n", ret);
+		return ret;
+	}
+
 	dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
 
+	gi2c->suspended = 1;
 	pm_runtime_set_suspended(gi2c->se.dev);
 	pm_runtime_set_autosuspend_delay(gi2c->se.dev, I2C_AUTO_SUSPEND_DELAY);
 	pm_runtime_use_autosuspend(gi2c->se.dev);
@@ -590,10 +597,19 @@ static int geni_i2c_remove(struct platform_device *pdev)
 
 static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
 {
+	int ret;
 	struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
 
 	disable_irq(gi2c->irq);
-	geni_se_resources_off(&gi2c->se);
+	ret = geni_se_resources_off(&gi2c->se);
+	if (ret) {
+		enable_irq(gi2c->irq);
+		return ret;
+
+	} else {
+		gi2c->suspended = 1;
+	}
+
 	return 0;
 }
 
@@ -607,12 +623,15 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
 		return ret;
 
 	enable_irq(gi2c->irq);
+	gi2c->suspended = 0;
 	return 0;
 }
 
 static int __maybe_unused geni_i2c_suspend_noirq(struct device *dev)
 {
-	if (!pm_runtime_suspended(dev)) {
+	struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+
+	if (!gi2c->suspended) {
 		geni_i2c_runtime_suspend(dev);
 		pm_runtime_disable(dev);
 		pm_runtime_set_suspended(dev);
-- 
2.18.0.203.gfac676dfb9-goog




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux