From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Intel Ice Lake has the same SMBus host controller than Intel Cannon Lake. Add the PCI ID to the drivers list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> [jarkko.nikula@xxxxxxxxxxxxxxx: Add entries to Documentation and Kconfig] Signed-off-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx> --- This goes on top of my https://patchwork.ozlabs.org/patch/936075/ "i2c: i801: Consolidate chipset names in documentation and Kconfig" --- Documentation/i2c/busses/i2c-i801 | 1 + drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 4 ++++ 3 files changed, 6 insertions(+) diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index ca396748a10d..d1ee484a787d 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -35,6 +35,7 @@ Supported adapters: * Intel Gemini Lake (SOC) * Intel Cannon Lake (PCH) * Intel Cedar Fork (PCH) + * Intel Ice Lake (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index aa19e3e053b1..e7a4d288c8b7 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -130,6 +130,7 @@ config I2C_I801 Gemini Lake (SOC) Cannon Lake (PCH) Cedar Fork (PCH) + Ice Lake (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index aa726607645e..941c223f6491 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -70,6 +70,7 @@ * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes * Cedar Fork (PCH) 0x18df 32 hard yes yes yes + * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -220,6 +221,7 @@ #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 #define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4 +#define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 @@ -1034,6 +1036,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS) }, { 0, } }; @@ -1518,6 +1521,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) case PCI_DEVICE_ID_INTEL_CDF_SMBUS: case PCI_DEVICE_ID_INTEL_DNV_SMBUS: case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS: + case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS: priv->features |= FEATURE_I2C_BLOCK_READ; priv->features |= FEATURE_IRQ; priv->features |= FEATURE_SMBUS_PEC; -- 2.18.0
