From: Alan Chiang <alanx.chiang@xxxxxxxxx>
The AT24 series chips use 8-bit address by default. If some
chips would like to support more than 8 bits, the at24 driver
should be added the compatible field for specfic chips.
Provide a flexible way to determine the addressing bits through
address-width in this patch.
Signed-off-by: Alan Chiang <alanx.chiang@xxxxxxxxx>
Signed-off-by: Andy Yeh <andy.yeh@xxxxxxxxx>
---
since v1:
-- Remove the address-width field in the example.
since v2:
-- Remove redundant space.
---
Documentation/devicetree/bindings/eeprom/at24.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
index 61d833a..aededdb 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ b/Documentation/devicetree/bindings/eeprom/at24.txt
@@ -72,6 +72,8 @@ Optional properties:
- wp-gpios: GPIO to which the write-protect pin of the chip is connected.
+ - address-width: number of address bits (one of 8, 16).
+
Example:
eeprom@52 {
--
2.7.4
