On Mon, Jun 4, 2018 at 10:00 PM, Eddie James <eajames@xxxxxxxxxxxxxxxxxx> wrote:
> Add register definitions for FSI-attached I2C master and functions to
> access those registers over FSI. Add an FSI driver so that our I2C bus
> is probed up during an FSI scan.
>
> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/i2c/busses/Kconfig | 11 ++
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-fsi.c | 234 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 246 insertions(+)
> create mode 100644 drivers/i2c/busses/i2c-fsi.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 4f8df2e..cddd159 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -1330,4 +1330,15 @@ config I2C_ZX2967
> This driver can also be built as a module. If so, the module will be
> called i2c-zx2967.
>
> +config I2C_FSI
> + tristate "FSI I2C driver"
> + depends on FSI
> + help
> + Driver for FSI bus attached I2C masters. These are I2C masters that
> + are connected to the system over an FSI bus, instead of the more
> + common PCI or MMIO interface.
> +
> + This driver can also be built as a module. If so, the module will be
> + called as i2c-fsi.
> +
> endmenu
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 5a86914..4909fd6 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -137,5 +137,6 @@ obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
> obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
> obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
> obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
> +obj-$(CONFIG_I2C_FSI) += i2c-fsi.o
>
> ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
> diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
> new file mode 100644
> index 0000000..e1b183c
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-fsi.c
> @@ -0,0 +1,234 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * FSI-attached I2C master algorithm
> + *
> + * Copyright 2018 IBM Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/device.h>
> +#include <linux/errno.h>
> +#include <linux/fsi.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#define FSI_ENGID_I2C 0x7
> +
> +#define I2C_DEFAULT_CLK_DIV 6
> +
> +/* i2c registers */
> +#define I2C_FSI_FIFO 0x00
> +#define I2C_FSI_CMD 0x04
> +#define I2C_FSI_MODE 0x08
> +#define I2C_FSI_WATER_MARK 0x0C
> +#define I2C_FSI_INT_MASK 0x10
> +#define I2C_FSI_INT_COND 0x14
> +#define I2C_FSI_OR_INT_MASK 0x14
> +#define I2C_FSI_INTS 0x18
> +#define I2C_FSI_AND_INT_MASK 0x18
> +#define I2C_FSI_STAT 0x1C
> +#define I2C_FSI_RESET_I2C 0x1C
> +#define I2C_FSI_ESTAT 0x20
> +#define I2C_FSI_RESET_ERR 0x20
> +#define I2C_FSI_RESID_LEN 0x24
> +#define I2C_FSI_SET_SCL 0x24
> +#define I2C_FSI_PORT_BUSY 0x28
> +#define I2C_FSI_RESET_SCL 0x2C
> +#define I2C_FSI_SET_SDA 0x30
> +#define I2C_FSI_RESET_SDA 0x34
> +
> +/* cmd register */
> +#define I2C_CMD_WITH_START BIT(31)
> +#define I2C_CMD_WITH_ADDR BIT(30)
> +#define I2C_CMD_RD_CONT BIT(29)
> +#define I2C_CMD_WITH_STOP BIT(28)
> +#define I2C_CMD_FORCELAUNCH BIT(27)
> +#define I2C_CMD_ADDR GENMASK(23, 17)
> +#define I2C_CMD_READ BIT(16)
> +#define I2C_CMD_LEN GENMASK(15, 0)
> +
> +/* mode register */
> +#define I2C_MODE_CLKDIV GENMASK(31, 16)
> +#define I2C_MODE_PORT GENMASK(15, 10)
> +#define I2C_MODE_ENHANCED BIT(3)
> +#define I2C_MODE_DIAG BIT(2)
> +#define I2C_MODE_PACE_ALLOW BIT(1)
> +#define I2C_MODE_WRAP BIT(0)
> +
> +/* watermark register */
> +#define I2C_WATERMARK_HI GENMASK(15, 12)
> +#define I2C_WATERMARK_LO GENMASK(7, 4)
> +
> +#define I2C_FIFO_HI_LVL 4
> +#define I2C_FIFO_LO_LVL 4
> +
> +/* interrupt register */
> +#define I2C_INT_INV_CMD BIT(15)
> +#define I2C_INT_PARITY BIT(14)
> +#define I2C_INT_BE_OVERRUN BIT(13)
> +#define I2C_INT_BE_ACCESS BIT(12)
> +#define I2C_INT_LOST_ARB BIT(11)
> +#define I2C_INT_NACK BIT(10)
> +#define I2C_INT_DAT_REQ BIT(9)
> +#define I2C_INT_CMD_COMP BIT(8)
> +#define I2C_INT_STOP_ERR BIT(7)
> +#define I2C_INT_BUSY BIT(6)
> +#define I2C_INT_IDLE BIT(5)
> +
> +#define I2C_INT_ENABLE 0x0000ff80
> +#define I2C_INT_ERR 0x0000fcc0
Now it looks like a flags combinations.
For me as for reader would be better to see quickly a decoded line.
My proposal is to introduce something like following
_INT_ALL GENMASK()
_INT_ENABLE (_INT_ALL & ~(_FOO | _BAR))
_INT_ERR ... similar way as above ...
What do you think?
> +
> +/* status register */
> +#define I2C_STAT_INV_CMD BIT(31)
> +#define I2C_STAT_PARITY BIT(30)
> +#define I2C_STAT_BE_OVERRUN BIT(29)
> +#define I2C_STAT_BE_ACCESS BIT(28)
> +#define I2C_STAT_LOST_ARB BIT(27)
> +#define I2C_STAT_NACK BIT(26)
> +#define I2C_STAT_DAT_REQ BIT(25)
> +#define I2C_STAT_CMD_COMP BIT(24)
> +#define I2C_STAT_STOP_ERR BIT(23)
> +#define I2C_STAT_MAX_PORT GENMASK(19, 16)
> +#define I2C_STAT_ANY_INT BIT(15)
> +#define I2C_STAT_SCL_IN BIT(11)
> +#define I2C_STAT_SDA_IN BIT(10)
> +#define I2C_STAT_PORT_BUSY BIT(9)
> +#define I2C_STAT_SELF_BUSY BIT(8)
> +#define I2C_STAT_FIFO_COUNT GENMASK(7, 0)
> +
> +#define I2C_STAT_ERR 0xfc800000
> +#define I2C_STAT_ANY_RESP 0xff800000
Ditto.
> +
> +/* extended status register */
> +#define I2C_ESTAT_FIFO_SZ GENMASK(31, 24)
> +#define I2C_ESTAT_SCL_IN_SY BIT(15)
> +#define I2C_ESTAT_SDA_IN_SY BIT(14)
> +#define I2C_ESTAT_S_SCL BIT(13)
> +#define I2C_ESTAT_S_SDA BIT(12)
> +#define I2C_ESTAT_M_SCL BIT(11)
> +#define I2C_ESTAT_M_SDA BIT(10)
> +#define I2C_ESTAT_HI_WATER BIT(9)
> +#define I2C_ESTAT_LO_WATER BIT(8)
> +#define I2C_ESTAT_PORT_BUSY BIT(7)
> +#define I2C_ESTAT_SELF_BUSY BIT(6)
> +#define I2C_ESTAT_VERSION GENMASK(4, 0)
> +
> +struct fsi_i2c_master {
> + struct fsi_device *fsi;
> + u8 fifo_size;
> +};
> +
> +static int fsi_i2c_read_reg(struct fsi_device *fsi, unsigned int reg,
> + u32 *data)
> +{
> + int rc;
> + __be32 data_be;
> +
> + rc = fsi_device_read(fsi, reg, &data_be, sizeof(data_be));
> + if (rc)
> + return rc;
> +
> + *data = be32_to_cpu(data_be);
> +
> + return 0;
> +}
> +
> +static int fsi_i2c_write_reg(struct fsi_device *fsi, unsigned int reg,
> + u32 *data)
> +{
> + __be32 data_be = cpu_to_be32p(data);
> +
> + return fsi_device_write(fsi, reg, &data_be, sizeof(data_be));
> +}
> +
> +static int fsi_i2c_dev_init(struct fsi_i2c_master *i2c)
> +{
> + int rc;
> + u32 mode = I2C_MODE_ENHANCED, extended_status, watermark;
> + u32 interrupt = 0;
> +
> + /* since we use polling, disable interrupts */
> + rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_INT_MASK, &interrupt);
> + if (rc)
> + return rc;
> +
> + mode |= FIELD_PREP(I2C_MODE_CLKDIV, I2C_DEFAULT_CLK_DIV);
> + rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
> + if (rc)
> + return rc;
> +
> + rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_ESTAT, &extended_status);
> + if (rc)
> + return rc;
> +
> + i2c->fifo_size = FIELD_GET(I2C_ESTAT_FIFO_SZ, extended_status);
> + watermark = FIELD_PREP(I2C_WATERMARK_HI,
> + i2c->fifo_size - I2C_FIFO_HI_LVL);
> + watermark |= FIELD_PREP(I2C_WATERMARK_LO, I2C_FIFO_LO_LVL);
> +
> + return fsi_i2c_write_reg(i2c->fsi, I2C_FSI_WATER_MARK, &watermark);
> +}
> +
> +static int fsi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
> + int num)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +static u32 fsi_i2c_functionality(struct i2c_adapter *adap)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_10BIT_ADDR
> + | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
Perhaps one property per line?
> +}
> +
> +static const struct i2c_algorithm fsi_i2c_algorithm = {
> + .master_xfer = fsi_i2c_xfer,
> + .functionality = fsi_i2c_functionality,
> +};
> +
> +static int fsi_i2c_probe(struct device *dev)
> +{
> + struct fsi_i2c_master *i2c;
> + int rc;
> +
> + i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
> + if (!i2c)
> + return -ENOMEM;
> +
> + i2c->fsi = to_fsi_dev(dev);
> +
> + rc = fsi_i2c_dev_init(i2c);
> + if (rc)
> + return rc;
> +
> + dev_set_drvdata(dev, i2c);
> +
> + return 0;
> +}
> +
> +static const struct fsi_device_id fsi_i2c_ids[] = {
> + { FSI_ENGID_I2C, FSI_VERSION_ANY },
> + { 0 }
0 is not required
> +};
> +
> +static struct fsi_driver fsi_i2c_driver = {
> + .id_table = fsi_i2c_ids,
> + .drv = {
> + .name = "i2c-fsi",
> + .bus = &fsi_bus_type,
> + .probe = fsi_i2c_probe,
> + },
> +};
> +
> +module_fsi_driver(fsi_i2c_driver);
> +
> +MODULE_AUTHOR("Eddie James <eajames@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("FSI attached I2C master");
> +MODULE_LICENSE("GPL");
> --
> 1.8.3.1
>
--
With Best Regards,
Andy Shevchenko
