From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
commit d89667b14f9d13b684287f6189ca209af5feee43 upstream.
The manual says (55.4.8.6) that HW does automatically send STOP after
NACK was received. My measuerments confirm that.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
[fabrizio: cherry-pick to 4.4]
Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Reviewed-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-rcar.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 44662e2..6f23b97 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -455,8 +455,8 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
/* Nack */
if (msr & MNR) {
- /* go to stop phase */
- rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
+ /* HW automatically sends STOP after received NACK */
+ rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP);
rcar_i2c_flags_set(priv, ID_NACK);
goto out;
--
2.7.4
