Hi Jarkko,
We have tried this patch on the two laptops we have now:
ASUS X580GD
dev@endless:~$ lscpu | grep "Model name"
Model name: Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz
dev@endless:~$ lspci | grep -E '(a36[89ab]|97c[56])'
00:15.0 Serial bus controller [0c80]: Intel Corporation Device a368 (rev 10)
00:15.1 Serial bus controller [0c80]: Intel Corporation Device a369 (rev 10)
dev@endless:~$ dmesg | grep -E 'lpss|i2c'
[ 9.692511] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 9.697702] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 9.920034] input: ELAN1200:00 04F3:303E Touchpad as
/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-ELAN1200:00/0018:04F3:303E.0001/input/input18
[ 9.920204] hid-multitouch 0018:04F3:303E.0001: input,hidraw0: I2C
HID v1.00 Mouse [ELAN1200:00 04F3:303E] on i2c-ELAN1200:00
[ 9.923873] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 9.924806] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
ASUS UX550GE
dev@endless:~$ lscpu | grep "Model name"
Model name: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz
dev@endless:~$ lspci | grep -E '(a36[89ab]|97c[56])'
00:15.0 Serial bus controller [0c80]: Intel Corporation Device a368 (rev 10)
00:15.1 Serial bus controller [0c80]: Intel Corporation Device a369 (rev 10)
dev@endless:~$ dmesg | grep -E 'lpss|i2c'
[ 6.926801] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 6.940907] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 6.971915] input: FTE1200:00 0B05:0201 Touchpad as
/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-FTE1200:00/0018:0B05:0201.0002/input/input21
[ 6.971961] hid-multitouch 0018:0B05:0201.0002: input,hidraw1: I2C
HID v1.00 Mouse [FTE1200:00 0B05:0201] on i2c-FTE1200:00
[ 6.973930] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 6.974700] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
The patch works on both of the laptops with the touchpads.
2018-05-18 18:46 GMT+08:00 Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>:
> On Fri, May 18, 2018 at 11:38:27AM +0300, Jarkko Nikula wrote:
>> Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C
>> than Sunrisepoint which uses 120 MHz. Preliminary information was that
>> both share the same clock rate but actual silicon implements elevated
>> rate for better support for 3.4 MHz high-speed I2C.
>>
>> This incorrect input clock rate results too high I2C bus clock in case
>> ACPI doesn't provide tuned I2C timing parameters since I2C host
>> controller driver calculates them from input clock rate.
>>
>> Fix this by using the correct rate. We still share the same 230 ns SDA
>> hold time value than Sunrisepoint.
>>
>> Cc: stable@xxxxxxxxxxxxxxx
>> Fixes: b418bbff36dd ("mfd: intel-lpss: Add Intel Cannonlake PCI IDs")
>> Reported-by: Jian-Hong Pan <jian-hong@xxxxxxxxxxxx>
>> Reported-by: Chris Chiu <chiu@xxxxxxxxxxxx>
>> Reported-by: Daniel Drake <drake@xxxxxxxxxxxx>
>> Signed-off-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
>
> Acked-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Tested-by: Jian-Hong Pan <jian-hong@xxxxxxxxxxxx>
