On Thu, May 17, 2018 at 2:36 AM, Benjamin Tissoires
<benjamin.tissoires@xxxxxxxxx> wrote:
> Scope (_SB.PCI0.I2C1)
> {
> Device (ETPD)
> {
> Name (SBFB, ResourceTemplate ()
> {
> I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
> AddressingMode7Bit, "\\_SB.PCI0.I2C1",
> 0x00, ResourceConsumer, _Y34, Exclusive,
> )
> })
> Name (SBFI, ResourceTemplate ()
> {
> Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
> {
> 0x0000005F,
> }
> })
...
>
> So nothing scary, the interrupt is a plain interrupt, not a GPIO. I
> guess the issue lies in i2c-designware and the AMD implementation...
Also, in dmesg we have:
[ 25.020612] cannonlake-pinctrl INT3450:00: pin 26 cannot be used as IRQ
[ 25.020615] genirq: Setting trigger mode 3 for irq 137 failed
(intel_gpio_irq_type+0x0/0x140)
[ 25.023113] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 25.023336] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 25.025326] i2c_hid i2c-ELAN1201:00: i2c-ELAN1201:00 supply vdd not
found, using dummy regulator
[ 25.025494] i2c_designware i2c_designware.1:
i2c_dw_handle_tx_abort: lost arbitration
[ 25.025652] i2c_designware i2c_designware.1:
i2c_dw_handle_tx_abort: lost arbitration
[ 25.025811] i2c_designware i2c_designware.1:
i2c_dw_handle_tx_abort: lost arbitration
[ 25.025970] i2c_designware i2c_designware.1:
i2c_dw_handle_tx_abort: lost arbitration
[ 25.025972] i2c_hid i2c-ELAN1201:00: hid_descr_cmd failed
0x5F is kind of high for a plain interrupt; I wonder if ACPI table
relies on static gpio->virq mapping that could be different on
Linux... Also I am surprised the IRQ is active-HIGH, normally it is
active low. Might want to try and hack the driver to force it to low
and see what happens...
Thanks.
--
Dmitry
