Some data structure members were either misspelled or missing.
Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver")
Fixes: 380b8a85e7 ("i2c: i2c-stm32f7: Add initial SMBus protocols support")
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
---
Version history:
v1:
* Initial
---
---
drivers/i2c/busses/i2c-stm32f7.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 0f87449..62d023e 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -211,11 +211,12 @@ struct stm32f7_i2c_setup {
/**
* struct stm32f7_i2c_timings - private I2C output parameters
- * @prec: Prescaler value
+ * @node: List entry
+ * @presc: Prescaler value
* @scldel: Data setup time
* @sdadel: Data hold time
* @sclh: SCL high period (master mode)
- * @sclh: SCL low period (master mode)
+ * @scll: SCL low period (master mode)
*/
struct stm32f7_i2c_timings {
struct list_head node;
@@ -237,7 +238,7 @@ struct stm32f7_i2c_timings {
* @size: type of SMBus protocol
* @read_write: direction of SMBus protocol
* SMBus block read and SMBus block write - block read process call protocols
- * @smbus_buff: buffer to be used for SMBus protocol transfer. It will
+ * @smbus_buf: buffer to be used for SMBus protocol transfer. It will
* contain a maximum of 32 bytes of data + byte command + byte count + PEC
* This buffer has to be 32-bit aligned to be compliant with memory address
* register in DMA mode.
--
2.7.4
