[PATCH] i2c: axxia: enable clock before calling clk_get_rate()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



axxia_i2c_init() uses clk_get_rate() for idev->i2c_clk. clk_get_rate()
should only be called if the clock is enabled, so ensure that by moving
the clk_prepare_enable() call before the call to axxia_i2c_init().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 08678b850cd0 ("i2c: axxia: Add I2C driver for AXM55xx")
Signed-off-by: Tobias Jordan <Tobias.Jordan@xxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-axxia.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 13f07482ec68..51338c48d193 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -532,6 +532,12 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 	if (idev->bus_clk_rate == 0)
 		idev->bus_clk_rate = 100000;	/* default clock rate */
 
+	ret = clk_prepare_enable(idev->i2c_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return ret;
+	}
+
 	ret = axxia_i2c_init(idev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to initialize\n");
@@ -545,12 +551,6 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = clk_prepare_enable(idev->i2c_clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable clock\n");
-		return ret;
-	}
-
 	i2c_set_adapdata(&idev->adapter, idev);
 	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
 	idev->adapter.owner = THIS_MODULE;
-- 
2.11.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux