Saving the original value of register SMBSLVCMD in
i801_enable_host_notify() doesn't work, because this function is
called not only at probe time but also at resume time. Do it in
i801_probe() instead, so that the saved value is not overwritten at
resume time.
Signed-off-by: Jean Delvare <jdelvare@xxxxxxx>
Fixes: 22e94bd6779e ("i2c: i801: store and restore the SLVCMD register at load and unload")
Cc: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
---
Jason, please test this patch and let us know if it fixes your problem.
drivers/i2c/busses/i2c-i801.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- linux-4.15.orig/drivers/i2c/busses/i2c-i801.c 2018-04-10 09:27:17.447796486 +0200
+++ linux-4.15/drivers/i2c/busses/i2c-i801.c 2018-04-10 09:31:43.989877499 +0200
@@ -965,8 +965,6 @@ static void i801_enable_host_notify(stru
if (!(priv->features & FEATURE_HOST_NOTIFY))
return;
- priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
-
if (!(SMBSLVCMD_HST_NTFY_INTREN & priv->original_slvcmd))
outb_p(SMBSLVCMD_HST_NTFY_INTREN | priv->original_slvcmd,
SMBSLVCMD(priv));
@@ -1614,6 +1612,10 @@ static int i801_probe(struct pci_dev *de
outb_p(inb_p(SMBAUXCTL(priv)) &
~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
+ /* Remember original Host Notify setting */
+ if (priv->features & FEATURE_HOST_NOTIFY)
+ priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
+
/* Default timeout in interrupt mode: 200 ms */
priv->adapter.timeout = HZ / 5;
--
Jean Delvare
SUSE L3 Support
