On Fri, Mar 30, 2018 at 10:08 AM Karthikeyan Ramasubramanian < kramasub@xxxxxxxxxxxxxx> wrote: > This driver manages the Generic Interface (GENI) firmware based Qualcomm > Universal Peripheral (QUP) Wrapper. GENI based QUP is the next generation > programmable module composed of multiple Serial Engines (SE) and supports > a wide range of serial interfaces like UART, SPI, I2C, I3C, etc. This > driver also enables managing the serial interface independent aspects of > Serial Engines. > Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx> > Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx> > Signed-off-by: Girish Mahadevan <girishm@xxxxxxxxxxxxxx> > --- > drivers/soc/qcom/Kconfig | 9 + > drivers/soc/qcom/Makefile | 1 + > drivers/soc/qcom/qcom-geni-se.c | 748 ++++++++++++++++++++++++++++++++++++++++ > include/linux/qcom-geni-se.h | 425 +++++++++++++++++++++++ > 4 files changed, 1183 insertions(+) > create mode 100644 drivers/soc/qcom/qcom-geni-se.c > create mode 100644 include/linux/qcom-geni-se.h Reviewed-by: Evan Green <evgreen@xxxxxxxxxxxx>
