This is another go of the sbs-manager driver using smbalert for
irq support from a while ago.
Enables the existing smbalert driver to be loaded via the device tree.
Only need to add smbus_alert interrupt to the i2c bus segement in the
devicetree and the core will then enable the alert driver.
Reorders the rquest irq call in the pca954x driver to ensure each
muxed i2c segment can handle service smbalerts on that segment before
irq's are enabled. The pca954x can't mask individual irq's routed thru
them.
Add the sbs-manager from Karl-Heinz.
Add the alert call back and gpio interface to allow the battery detect
logic in the existing sbs-battery driver to work.
Karl-Heinz Schneider (2):
Documentation: Add sbs-manager device tree node documentation
power: Adds support for Smart Battery System Manager
Phil Reid (7):
i2c: i2c-smbus: Support threaded irqs.
i2c: i2c-smbus: Add null ptr guard in smb_alert_probe
i2c: i2c-smbus: add of_i2c_setup_smbus_alert
i2c: core: call of_i2c_setup_smbus_alert in i2c_register_adapter
i2c: mux: pca954x: Call request irq after adding mux segments
power: supply: sbs-battery: Add alert callback
power: supply: sbs-manager: Add alert callback and battery change
notification
Documentation/devicetree/bindings/i2c/i2c.txt | 4 +-
.../bindings/power/supply/sbs,sbs-manager.txt | 64 +++
drivers/i2c/i2c-core.c | 4 +
drivers/i2c/i2c-smbus.c | 64 ++-
drivers/i2c/muxes/i2c-mux-pca954x.c | 52 ++-
drivers/power/supply/Kconfig | 14 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/sbs-battery.c | 16 +-
drivers/power/supply/sbs-manager.c | 448 +++++++++++++++++++++
include/linux/i2c-smbus.h | 9 +
10 files changed, 637 insertions(+), 39 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
create mode 100644 drivers/power/supply/sbs-manager.c
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
