On some platforms the register have been setup with platform specific
values by the firmware and should not be reset.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/power/supply/bq24190_charger.c | 5 +++++
include/linux/power/bq24190_charger.h | 1 +
2 files changed, 6 insertions(+)
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index a4f0849..c92a40e4 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -151,6 +151,7 @@ struct bq24190_dev_info {
struct device *dev;
struct power_supply *charger;
struct power_supply *battery;
+ struct bq24190_platform_data *pdata;
char model_name[I2C_NAME_SIZE];
kernel_ulong_t model;
unsigned int gpio_int;
@@ -506,6 +507,9 @@ static int bq24190_register_reset(struct bq24190_dev_info *bdi)
int ret, limit = 100;
u8 v;
+ if (bdi->pdata && bdi->pdata->no_register_reset)
+ return 0;
+
/* Reset the registers */
ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
BQ24190_REG_POC_RESET_MASK,
@@ -1339,6 +1343,7 @@ static int bq24190_probe(struct i2c_client *client,
bdi->client = client;
bdi->dev = dev;
bdi->model = id->driver_data;
+ bdi->pdata = client->dev.platform_data;
strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
mutex_init(&bdi->f_reg_lock);
bdi->f_reg = 0;
diff --git a/include/linux/power/bq24190_charger.h b/include/linux/power/bq24190_charger.h
index 9f02837..cb49717 100644
--- a/include/linux/power/bq24190_charger.h
+++ b/include/linux/power/bq24190_charger.h
@@ -11,6 +11,7 @@
struct bq24190_platform_data {
unsigned int gpio_int; /* GPIO pin that's connected to INT# */
+ bool no_register_reset;
};
#endif
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
