Re: [PATCH v3 3/5] i2c: mux: pca954x: Add interrupt controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 09, 2017 at 05:02:54PM +0800, Phil Reid wrote:
> Various muxes can aggregate multiple interrupts from each i2c bus.
> All of the muxes with interrupt support combine the active low irq lines
> using an internal 'and' function and generate a combined active low
> output. The muxes do provide the ability to read a control register to
> determine which irq is active. By making the mux an irq controller isr
> latency can potentially be reduced by reading the status register and
> then only calling the registered isr on that bus segment.
> 
> As there is no irq masking on the mux irq are disabled until irq_unmask is
> called at least once.
> 
> Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>

Is the ack from Peda here forgotten or still missing?

@peda: Once you are happy, do you want to take these patches via your
shiny new mux-tree or do you prefer if I pick them?

Regards,

   Wolfram

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux