On Jan 04 2017 or thereabouts, Pali Rohár wrote:
> On Wednesday 04 January 2017 10:05:22 Benjamin Tissoires wrote:
> > On Jan 04 2017 or thereabouts, Pali Rohár wrote:
> > > On Tuesday 03 January 2017 12:59:37 Dmitry Torokhov wrote:
> > > > On Tue, Jan 03, 2017 at 09:39:13PM +0100, Pali Rohár wrote:
> > > > > On Tuesday 03 January 2017 21:24:18 Dmitry Torokhov wrote:
> > > > > > On Tue, Jan 03, 2017 at 09:05:51PM +0100, Pali Rohár wrote:
> > > > > > > On Tuesday 03 January 2017 20:48:12 Dmitry Torokhov wrote:
> > > > > > > > On Tue, Jan 03, 2017 at 07:50:17PM +0100, Pali Rohár wrote:
> > > > > > > > > On Tuesday 03 January 2017 19:38:43 Dmitry Torokhov wrote:
> > > > > > > > > > On Tue, Jan 03, 2017 at 10:06:41AM +0100, Benjamin Tissoires
> > > > > > > > > >
> > > > > > > > > > wrote:
> > > > > > > > > > > On Dec 29 2016 or thereabouts, Pali Rohár wrote:
> > > > > > > > > > > > On Thursday 29 December 2016 22:09:32 Michał Kępień wrote:
> > > > > > > > > > > > > > On Thursday 29 December 2016 14:47:19 Michał Kępień
> > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > > On Thursday 29 December 2016 09:29:36 Michał
> > > > > > > > > > > > > > > > Kępień
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > > > > Dell platform team told us that some (DMI
> > > > > > > > > > > > > > > > > > whitelisted) Dell Latitude machines have ST
> > > > > > > > > > > > > > > > > > microelectronics accelerometer at i2c address
> > > > > > > > > > > > > > > > > > 0x29. That i2c address is not specified in
> > > > > > > > > > > > > > > > > > DMI or ACPI, so runtime detection without
> > > > > > > > > > > > > > > > > > whitelist which is below is not possible.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Presence of that ST microelectronics
> > > > > > > > > > > > > > > > > > accelerometer is verified by existence of
> > > > > > > > > > > > > > > > > > SMO88xx ACPI device which represent that
> > > > > > > > > > > > > > > > > > accelerometer. Unfortunately without i2c
> > > > > > > > > > > > > > > > > > address.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > This part of the commit message sounded a bit
> > > > > > > > > > > > > > > > > confusing to me at first because there is
> > > > > > > > > > > > > > > > > already an ACPI driver which handles SMO88xx
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > devices (dell-smo8800). My understanding is
> > > > > > > > > > > > > > > > > that:
> > > > > > > > > > > > > > > > > * the purpose of this patch is to expose a
> > > > > > > > > > > > > > > > > richer interface (as
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > provided by lis3lv02d) to these devices on
> > > > > > > > > > > > > > > > > some machines,
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > * on whitelisted machines, dell-smo8800 and
> > > > > > > > > > > > > > > > > lis3lv02d can work
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > simultaneously (even though dell-smo8800
> > > > > > > > > > > > > > > > > effectively duplicates the work that
> > > > > > > > > > > > > > > > > lis3lv02d does).
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > No. dell-smo8800 reads from ACPI irq number and
> > > > > > > > > > > > > > > > exports /dev/freefall device which notify
> > > > > > > > > > > > > > > > userspace about falls. lis3lv02d is i2c driver
> > > > > > > > > > > > > > > > which exports axes of accelerometer. Additionaly
> > > > > > > > > > > > > > > > lis3lv02d can export also /dev/freefall if
> > > > > > > > > > > > > > > > registerer of i2c device provides irq number --
> > > > > > > > > > > > > > > > which is not case of this patch.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > So both drivers are doing different things and
> > > > > > > > > > > > > > > > both are useful.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > IIRC both dell-smo8800 and lis3lv02d represent
> > > > > > > > > > > > > > > > one HW device (that ST microelectronics
> > > > > > > > > > > > > > > > accelerometer) but due to complicated HW
> > > > > > > > > > > > > > > > abstraction and layers on Dell laptops it is
> > > > > > > > > > > > > > > > handled by two drivers, one ACPI and one i2c.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Yes, in ideal world irq number should be passed
> > > > > > > > > > > > > > > > to lis3lv02d driver and that would export whole
> > > > > > > > > > > > > > > > device (with /dev/freefall too), but due to HW
> > > > > > > > > > > > > > > > abstraction it is too much complicated...
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Why? AFAICT, all that is required to pass that IRQ
> > > > > > > > > > > > > > > number all the way down to lis3lv02d is to set the
> > > > > > > > > > > > > > > irq field of the struct i2c_board_info you are
> > > > > > > > > > > > > > > passing to i2c_new_device(). And you can extract
> > > > > > > > > > > > > > > that IRQ number e.g. in
> > > > > > > > > > > > > > > check_acpi_smo88xx_device(). However, you would
> > > > > > > > > > > > > > > then need to make sure dell-smo8800 does not
> > > > > > > > > > > > > > > attempt to request the same IRQ on whitelisted
> > > > > > > > > > > > > > > machines. This got me thinking about a way to
> > > > > > > > > > > > > > > somehow incorporate your changes into dell-smo8800
> > > > > > > > > > > > > > > using Wolfram's bus_notifier suggestion, but I do
> > > > > > > > > > > > > > > not have a working solution for now. What is
> > > > > > > > > > > > > > > tempting about this approach is that you would not
> > > > > > > > > > > > > > > have to scan the ACPI namespace in search of
> > > > > > > > > > > > > > > SMO88xx devices, because smo8800_add() is
> > > > > > > > > > > > > > > automatically called for them. However, I fear that
> > > > > > > > > > > > > > > the resulting solution may be more complicated than
> > > > > > > > > > > > > > > the one you submitted.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Then we need to deal with lot of problems. Order of
> > > > > > > > > > > > > > loading .ko modules is undefined. Binding devices to
> > > > > > > > > > > > > > drivers registered by .ko module is also in "random"
> > > > > > > > > > > > > > order. At any time any of those .ko module can be
> > > > > > > > > > > > > > unloaded or at least device unbind (via sysfs) from
> > > > > > > > > > > > > > driver... And there can be some pathological
> > > > > > > > > > > > > > situation (thanks to adding ACPI layer as Andy
> > > > > > > > > > > > > > pointed) that there will be more SMO88xx devices in
> > > > > > > > > > > > > > ACPI. Plus you can compile kernel with and without
> > > > > > > > > > > > > > those modules and also you can blacklist loading
> > > > > > > > > > > > > > them (so compile time check is not enough). And
> > > > > > > > > > > > > > still some correct message notifier must be used.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > I think such solution is much much more complicated,
> > > > > > > > > > > > > > there are lot of combinations of kernel configuration
> > > > > > > > > > > > > > and available dell devices...
> > > > > > > > > > > > >
> > > > > > > > > > > > > I tried a few more things, but ultimately failed to
> > > > > > > > > > > > > find a nice way to implement this.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Another issue popped up, though. Linus' master branch
> > > > > > > > > > > > > contains a recent commit by Benjamin Tissoires (CC'ed),
> > > > > > > > > > > > > 4d5538f5882a ("i2c: use an IRQ to report Host Notify
> > > > > > > > > > > > > events, not alert") which breaks your patch. The
> > > > > > > > > > > > > reason for that is that lis3lv02d relies on the i2c
> > > > > > > > > > > > > client's IRQ being 0 to detect that it should not
> > > > > > > > > > > > > create /dev/freefall.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Benjamin's patch causes the Host Notify IRQ to be
> > > > > > > > > > > > >
> > > > > > > > > > > > > assigned to the i2c client your patch creates, thus
> > > > > > > > > > > > > causing lis3lv02d to create /dev/freefall, which in
> > > > > > > > > > > > > turn conflicts with dell-smo8800 which is trying to
> > > > > > > > > > > > > create /dev/freefall itself.
> > > > > > > > > > > >
> > > > > > > > > > > > So 4d5538f5882a is breaking lis3lv02d driver...
> > > > > > > > > > >
> > > > > > > > > > > Apologies for that.
> > > > > > > > > > >
> > > > > > > > > > > I could easily fix this by adding a kernel API to know
> > > > > > > > > > > whether the provided irq is from Host Notify or if it was
> > > > > > > > > > > coming from an actual declaration. However, I have no idea
> > > > > > > > > > > how many other drivers would require this (hopefully only
> > > > > > > > > > > this one).
> > > > > > > > > > >
> > > > > > > > > > > One other solution would be to reserve the Host Notify IRQ
> > > > > > > > > > > and let the actual drivers that need it to set it, but
> > > > > > > > > > > this was not the best solution according to Dmitri. On my
> > > > > > > > > > > side, I am not entirely against this given that it's a
> > > > > > > > > > > chip feature, so the driver should be able to know that
> > > > > > > > > > > it's available.
> > > > > > > > > > >
> > > > > > > > > > > Dmitri, Wolfram, Jean, any preferences?
> > > > > > > > > >
> > > > > > > > > > I read this:
> > > > > > > > > >
> > > > > > > > > > "IIRC both dell-smo8800 and lis3lv02d represent one HW device
> > > > > > > > > > (that ST microelectronics accelerometer) but due to
> > > > > > > > > > complicated HW abstraction and layers on Dell laptops it is
> > > > > > > > > > handled by two drivers, one ACPI and one i2c."
> > > > > > > > > >
> > > > > > > > > > and that is the core of the issue. You have 2 drivers
> > > > > > > > > > fighting over the same device. Fix this and it will all
> > > > > > > > > > work.
> > > > > > > > >
> > > > > > > > > With my current implementation (which I sent in this patch),
> > > > > > > > > they are not fighting.
> > > > > > > > >
> > > > > > > > > dell-smo8800 exports /dev/freefall (and nothing more) and
> > > > > > > > > lis3lv02d only accelerometer device as lis3lv02d driver does
> > > > > > > > > not get IRQ number in platform data.
> > > > > > > > >
> > > > > > > > > > As far as I can see hp_accel instantiates lis3lv02d and
> > > > > > > > > > accesses it via ACPI methods, can the same be done for Dell?
> > > > > > > > >
> > > > > > > > > No, Dell does not have any ACPI methods. And as I wrote in ACPI
> > > > > > > > > or DMI is even not i2c address of device, so it needs to be
> > > > > > > > > specified in code itself.
> > > > > > > > >
> > > > > > > > > Really there is no other way... :-(
> > > > > > > >
> > > > > > > > Sure there is:
> > > > > > > >
> > > > > > > > 1. dell-smo8800 instantiates I2C device as "dell-smo8800-accel".
> > > > > > > > 2. dell-smo8800 provides read/write functions for lis3lv02d that
> > > > > > > > simply forward requests to dell-smo8800-accel i2c client.
> > > > > > > > 3. dell-smo8800 instantiates lis3lv02d instance like hp_accel
> > > > > > > > does.
> > > > > > >
> > > > > > > Sorry, but I do not understand how you mean it... Why to provides
> > > > > > > new read/write i2c functions which are already implemented by
> > > > > > > i2c-i801 bus and lis3lv02d i2c driver?
> > > > > >
> > > > > > Because that would allow you to avoid clashes with i2c creating
> > > > > > interrupt mapping for client residing on host-notify-capable
> > > > > > controller.
> > > > > >
> > > > > > > > Alternatively, can lis3lv02d be tasked to create /dev/freefall?
> > > > > > >
> > > > > > > If i2c_board_info contains IRQ then lis3lv02d create /dev/freefall
> > > > > > > device.
> > > > > > >
> > > > > > > But... what is problem with current implementation? Accelerometer
> > > > > > > HW provides two functions:
> > > > > > >
> > > > > > > 1) 3 axes reports
> > > > > > > 2) Disk freefall detection
> > > > > > >
> > > > > > > And 1) is handled by i2c driver lis3lv02d and 2) is by
> > > > > > > dell-smo8800. Both functions are independent here.
> > > > > > >
> > > > > > > I think you just trying to complicate this situation even more to
> > > > > > > be more complicated as currently is.
> > > > > >
> > > > > > Because this apparently does not work for you, does it?
> > > > >
> > > > > It is working fine. I do not see any problem.
> > > > >
> > > > > > In general,
> > > > > > if you want the same hardware be handled by 2 different drivers you
> > > > > > are going to have bad time.
> > > > >
> > > > > Yes, but in this case half of device is ACPI based and other half i2c
> > > > > based. This is problem of ACPI and Dell design.
> > > > >
> > > > > > It seems to be that /dev/freefall in dell-smo8800 and lis3lv02d are
> > > > > > the same, right?
> > > > >
> > > > > Yes. I understand that clean solution is to have one driver which
> > > > > provides everything.
> > > > >
> > > > > But because half of data are ACPI and half i2c, you still needs to
> > > > > create two drivers (one ACPI and one i2c). You can put both drivers into
> > > > > one .ko module, but still these will be two drivers due to how ACPI and
> > > > > i2c linux abstractions are different.
> > > > >
> > > > > > So, instead of having 2 drivers split the
> > > > > > functionality, can you forego registering smo8800 ACPI driver on
> > > > > > your whitelisted boxes and instead instantiate full i2c client
> > > > > > device with properly assigned both address and IRQ and let lis3lv02d
> > > > > > handle it (providing both accelerometer data and /dev/freefall)?
> > > > >
> > > > > With Michał we already discussed about it, see emails. Basically you can
> > > > > enable/disable kernel modules at compile time or blacklist at runtime
> > > > > (or even chose what will be compiled into vmlinux and what as external
> > > > > .ko module).
> > > >
> > > > This can be solved with a bit of Kconfig/IS_ENABLED() code.
> > > >
> > > > > Some distributions blacklist i2c-i801.ko module... And
> > > >
> > > > Any particular reason for that?
> > > >
> > > > > there can be also problem with initialization of i2c-i801 driver (fix is
> > > > > in commit a7ae81952cda, but does not have to work at every time!). So
> > > > > that move on whitelisted machines can potentially cause disappearance of
> > > > > /dev/freefall and users will not have hdd protection which is currently
> > > > > working.
> > > >
> > > > Well, I gave you 2 possible solutions (roll your own i2c read/write,
> > > > forward them to i2c client) or have faith in your implementation and let
> > > > lis3lv02d handle it.
> > > >
> > > > The 3rd one is to possibly add a flag to disable host notify to IRQ
> > > > mapping for given client (if Wolfram/Jean OK with it).
> > > >
> > > > Oh, the 4th one: change the irq in lis3lv02d.h to be "int" and change
> > > > the check in lis3lv02d.c to be "lis->irq <= 0" and instantiate your
> > > > i2c_client with board_info->irq = -1.
> > > >
> > > > Pick whichever you prefer.
> > > >
> > > > By the way, what do you need accelerometer for on these devices? They
> > > > don't appear to be tablets that could use one...
> > >
> > > Ah, you are talking about problem that after 4d5538f5882a lis3lv02d will
> > > not work... I thought that discussion is about different mechanism how
> > > to implement bus registration notification to smo8800 driver (or
> > > different solution to not have registration in i801).
> > >
> >
> > Just because I am not sure I got everything right, could you confirm
> > that:
> > - in the current upstream tree, the dell-smo8800 driver is now broken
> > after 4d5538f5882a (i2c: use an IRQ to report Host Notify events, not
> > alert)
>
> No, dell-smo8800 it is working fine. It is fully independent from i2c
> and lis3lv02d. It is pure ACPI driver which does not share anything with
> i2c.
>
> > - this series adds an extra lis3lv02d on some machines and you have
> > problem fighting for the irq (but this is not upstream yet).
>
> Yes, this series (not merged yet) adds extra lis3lv02d device but is not
> working because of 4d5538f5882a.
>
> > The extra lis3lv02d node is added from dell-smo8800
>
> No, dell-smo8800 does not add new node in this patch.
>
> > If the first point is not correct (by default, dell-smo8800 will not be
> > loaded at the same time than lis3lv02d), then it's a design issue with
> > the interactions between those 2 drivers.
>
> No, there is no interactions between these two drivers (dell-smo8800 and
> lis3lv02d). dell-smo8800 is pure ACPI driver and exports just
> /dev/freefall device based on IRQ (and nothing more).
>
> And lis3lv02d in *current* configuration in this patch exports only
> accelerometer input device, not /dev/freefall. It does not use IRQ.
> (Just there is problem with 4d5538f5882a which tells lis3lv02d IRQ
> number which is not freefall report, therefore lis3lv02d does not work).
>
> To make it clear, ST Accelerometer provides two operations:
> * report free fall
> * report 3 axes
>
> Free fall is reported by IRQ, state of 3 axes via i2c bus. Free fall IRQ
> is handled by dell-smo8800, state of 3 axes via i2c lis3lv02d driver.
>
> lis3lv02d can handle also free fall IRQ is platform i2c data provides
> IRQ number for it -- but this is not case in our Dell configuration. But
> commit 4d5538f5882a inject some IRQ number to lis3lv02d driver which is
> not free fall detection and so is breaking lis3lv02 driver. In our Dell
> configuration (by this patch) there should be no IRQ number.
>
> It is clear now?
I think I am starting to understand the problem.
Currently (upstream tree), 4d5538f5882a doesn't break anything. On the
mentioned Dell platforms, the dell-smo8800 gets loaded and provides
/dev/freefall. lis3lv02d is not loaded so everything just works.
The problem comes from this patch which doesn't set the irq in
i2c_board_info and so i2c_core sets the IRQ to Host Notify. I think
Dmitri already gave you the solution: set the irq to -1 (or -ENOENT)
in i2c_board_info in your patch and only forward it to
lis3lv02d_init_device() only if it is positive (valid).
So, to me 4d5538f5882a doesn't introduce a regression so we should keep
it in its current state.
Cheers,
Benjamin
>
> > If the first point is correct because ACPI declares both devices, then
> > there is an urgent fix to propose to not enable Host Notify by default
> > on Host Notifier capable adapters. (even though the design between the
> > 2 drivers is wrong, it's considered as a regression).
> >
> > Cheers,
> > Benjamin
>
> --
> Pali Rohár
> pali.rohar@xxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
