Re: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

v6 was apparently rushed a little bit too much, but I really wanted to
supersede the stupidity I found elsewhere in v5. Perhaps I shouldn't
have bolted on the changes for the iio-mux bindings, but so I did...

On 2016-11-30 09:16, Peter Rosin wrote:
> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
> ---
>  .../bindings/iio/multiplexer/iio-mux.txt           | 40 ++++++++++++++++++++++
>  MAINTAINERS                                        |  6 ++++
>  2 files changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
> new file mode 100644
> index 000000000000..8080cf790d82
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
> @@ -0,0 +1,40 @@
> +IIO multiplexer bindings
> +
> +If a multiplexer is used to select which hardware signal is fed to
> +e.g. an ADC channel, these bindings describe that situation.
> +
> +Required properties:
> +- compatible : "iio-mux"
> +- io-channels : Channel node of the parent channel that has multiplexed
> +		input.
> +- io-channel-names : Should be "parent".
> +- #address-cells = <1>;
> +- #size-cells = <0>;
> +- mux-controls : Mux controller node to use for operating the mux
> +- channels : List of strings, labeling the mux controller states.
> +
> +The multiplexer state as described in ../misc/mux-controller.txt

Delete the above non-sentence, but reintroduce the gist of it...

> +For each non-empty string in the channels property, an iio channel will
> +be created. The number of this iio channel is the same as the index into
> +the list of strings in the channels property, and also matches the mux
> +controller state.

...at the end of the above sentence instead.

I'm holding off v7 pending more important changes.

Cheers,
Peter

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux