On Tuesday, 8 November 2016 08:13:37 GMT Jan Glauber wrote:
> On Mon, Nov 07, 2016 at 08:09:20PM +0000, Paul Burton wrote:
> > Commit 70121f7f3725 ("i2c: octeon: thunderx: Limit register access
> > retries") attempted to replace potentially infinite loops with ones
> > which will time out using readq_poll_timeout, but in doing so it
> > inverted the condition for exiting this loop.
> >
> > Tested on a Rhino Labs UTM-8 with Octeon CN7130.
> >
> > Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
> > Cc: Jan Glauber <jglauber@xxxxxxxxxx>
> > Cc: David Daney <david.daney@xxxxxxxxxx>
> > Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
> > Cc: linux-i2c@xxxxxxxxxxxxxxx
> >
> > ---
>
> Acked-by: Jan Glauber <jglauber@xxxxxxxxxx>
>
> Thanks for spotting this. I think this should go into stable too for
> 4.8, so adding Cc: stable@xxxxxxxxxxxxxxx.
Hi Jan,
...but the bad patch was only merged for v4.9-rc1?
Thanks,
Paul
>
> > drivers/i2c/busses/i2c-octeon-core.h | 7 ++++---
> > 1 file changed, 4 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-octeon-core.h
> > b/drivers/i2c/busses/i2c-octeon-core.h index 1db7c83..d980406 100644
> > --- a/drivers/i2c/busses/i2c-octeon-core.h
> > +++ b/drivers/i2c/busses/i2c-octeon-core.h
> > @@ -146,8 +146,9 @@ static inline void octeon_i2c_reg_write(struct
> > octeon_i2c *i2c, u64 eop_reg, u8>
> > __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base +
SW_TWSI(i2c));
> >
> > - readq_poll_timeout(i2c->twsi_base + SW_TWSI(i2c), tmp, tmp &
SW_TWSI_V,
> > - I2C_OCTEON_EVENT_WAIT, i2c->adap.timeout);
> > + readq_poll_timeout(i2c->twsi_base + SW_TWSI(i2c), tmp,
> > + !(tmp & SW_TWSI_V), I2C_OCTEON_EVENT_WAIT,
> > + i2c->adap.timeout);
> >
> > }
> >
> > #define octeon_i2c_ctl_write(i2c, val) \
> >
> > @@ -173,7 +174,7 @@ static inline int octeon_i2c_reg_read(struct
> > octeon_i2c *i2c, u64 eop_reg,>
> > __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base +
> > SW_TWSI(i2c));
> >
> > ret = readq_poll_timeout(i2c->twsi_base + SW_TWSI(i2c), tmp,
> >
> > - tmp & SW_TWSI_V, I2C_OCTEON_EVENT_WAIT,
> > + !(tmp & SW_TWSI_V), I2C_OCTEON_EVENT_WAIT,
> >
> > i2c->adap.timeout);
> >
> > if (error)
> >
> > *error = ret;
Attachment:
signature.asc
Description: This is a digitally signed message part.
