[PATCH 07/10] gpio: ptxpmb-cpld: Add support for PTXPMB CPLD's GPIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Guenter Roeck <groeck@xxxxxxxxxxx>

Support the GPIO block which is located in PTXPMB CPLDs
on relevant Juniper platforms.

Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxx>
Signed-off-by: Rajat Jain <rajatjain@xxxxxxxxxxx>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
---
 drivers/gpio/Kconfig            |  11 +++
 drivers/gpio/Makefile           |   1 +
 drivers/gpio/gpio-ptxpmb-cpld.c | 177 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 189 insertions(+)
 create mode 100644 drivers/gpio/gpio-ptxpmb-cpld.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 26ee00f..9c91de6 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -360,6 +360,17 @@ config GPIO_PL061
 	help
 	  Say yes here to support the PrimeCell PL061 GPIO device
 
+config GPIO_PTXPMB_CPLD
+	tristate "PTXPMB CPLD GPIO"
+	depends on MFD_JUNIPER_CPLD
+	default y if MFD_JUNIPER_CPLD
+	help
+	  This driver supports the GPIO interfaces on the PTXPMB CPLD which is
+	  present on the relevant Juniper platforms.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called gpio-ptxpmb-cpld.
+
 config GPIO_PXA
 	bool "PXA GPIO support"
 	depends on ARCH_PXA || ARCH_MMP
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ab28a2d..d397ea5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
 obj-$(CONFIG_GPIO_PISOSR)	+= gpio-pisosr.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
+obj-$(CONFIG_GPIO_PTXPMB_CPLD)	+= gpio-ptxpmb-cpld.o
 obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
 obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
diff --git a/drivers/gpio/gpio-ptxpmb-cpld.c b/drivers/gpio/gpio-ptxpmb-cpld.c
new file mode 100644
index 0000000..e6fab7c
--- /dev/null
+++ b/drivers/gpio/gpio-ptxpmb-cpld.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2012 Juniper networks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <linux/mfd/ptxpmb_cpld.h>
+
+/**
+ * struct ptxpmb_cpld_gpio - GPIO private data structure.
+ * @base:			PCI base address of Memory mapped I/O register.
+ * @dev:			Pointer to device structure.
+ * @gpio:			Data for GPIO infrastructure.
+ */
+struct ptxpmb_cpld_gpio {
+	void __iomem *base;
+	struct device *dev;
+	struct gpio_chip gpio;
+	struct mutex lock;
+};
+
+static u8 *ptxpmb_cpld_gpio_get_addr(struct pmb_boot_cpld *cpld,
+				     unsigned int nr)
+{
+	if (nr < 8)			/* 0..7: reset			*/
+		return &cpld->reset;
+	else if (nr < 16)		/* 8..15: control		*/
+		return &cpld->control;
+	else if (nr < 24)		/* 16..23: gpio1		*/
+		return &cpld->gpio_1;
+	else if (nr < 32)		/* 24..31: gpio2		*/
+		return &cpld->gpio_2;
+	else if (nr < 40)		/* 32..39: gp_reset1		*/
+		return &cpld->gp_reset1;
+	return &cpld->thermal_status;	/* 40..41: thermal status	*/
+}
+
+static void ptxpmb_cpld_gpio_set(struct gpio_chip *gpio, unsigned int nr,
+				 int val)
+{
+	u32 reg;
+	u8 bit = 1 << (nr & 7);
+	struct ptxpmb_cpld_gpio *chip =
+	  container_of(gpio, struct ptxpmb_cpld_gpio, gpio);
+	u8 *addr = ptxpmb_cpld_gpio_get_addr(chip->base, nr);
+
+	mutex_lock(&chip->lock);
+	reg = ioread8(addr);
+	if (val)
+		reg |= bit;
+	else
+		reg &= ~bit;
+
+	iowrite8(reg, addr);
+	mutex_unlock(&chip->lock);
+}
+
+static int ptxpmb_cpld_gpio_get(struct gpio_chip *gpio, unsigned int nr)
+{
+	struct ptxpmb_cpld_gpio *chip = container_of(gpio,
+						     struct ptxpmb_cpld_gpio,
+						     gpio);
+	u8 *addr = ptxpmb_cpld_gpio_get_addr(chip->base, nr);
+	u8 bit = 1 << (nr & 7);
+
+	return !!(ioread8(addr) & bit);
+}
+
+static int ptxpmb_cpld_gpio_direction_output(struct gpio_chip *gpio,
+					     unsigned int nr, int val)
+{
+	return 0;
+}
+
+static int ptxpmb_cpld_gpio_direction_input(struct gpio_chip *gpio,
+					    unsigned int nr)
+{
+	return 0;
+}
+
+static void ptxpmb_cpld_gpio_setup(struct ptxpmb_cpld_gpio *chip)
+{
+	struct gpio_chip *gpio = &chip->gpio;
+
+	gpio->label = dev_name(chip->dev);
+	gpio->owner = THIS_MODULE;
+	gpio->direction_input = ptxpmb_cpld_gpio_direction_input;
+	gpio->get = ptxpmb_cpld_gpio_get;
+	gpio->direction_output = ptxpmb_cpld_gpio_direction_output;
+	gpio->set = ptxpmb_cpld_gpio_set;
+	gpio->dbg_show = NULL;
+	gpio->base = -1;
+	gpio->ngpio = 48;
+	gpio->can_sleep = 0;
+#ifdef CONFIG_OF_GPIO
+	gpio->of_node = chip->dev->of_node;
+#endif
+}
+
+static int ptxpmb_cpld_gpio_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct ptxpmb_cpld_gpio *chip;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	chip->base = devm_ioremap_nocache(dev, res->start, resource_size(res));
+	if (!chip->base)
+		return -ENOMEM;
+
+	mutex_init(&chip->lock);
+	ptxpmb_cpld_gpio_setup(chip);
+	ret = gpiochip_add(&chip->gpio);
+	if (ret) {
+		dev_err(dev, "CPLD gpio: Failed to register GPIO\n");
+		return ret;
+	}
+	return 0;
+}
+
+static int ptxpmb_cpld_gpio_remove(struct platform_device *pdev)
+{
+	struct ptxpmb_cpld_gpio *chip = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&chip->gpio);
+
+	return 0;
+}
+
+static const struct of_device_id ptxpmb_cpld_gpio_ids[] = {
+	{ .compatible = "jnx,gpio-ptxpmb-cpld", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ptxpmb_cpld_gpio_ids);
+
+static struct platform_driver ptxpmb_cpld_gpio_driver = {
+	.driver = {
+		.name = "gpio-ptxpmb-cpld",
+		.owner  = THIS_MODULE,
+		.of_match_table = ptxpmb_cpld_gpio_ids,
+	},
+	.probe = ptxpmb_cpld_gpio_probe,
+	.remove = ptxpmb_cpld_gpio_remove,
+};
+
+module_platform_driver(ptxpmb_cpld_gpio_driver);
+
+MODULE_DESCRIPTION("CPLD FPGA GPIO Driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux