From: Maryam Seraj <mseraj@xxxxxxxxxxx>
Introduce SAM I2C driver for the I2C interfaces on the Juniper
SAM FPGA.
Signed-off-by: Maryam Seraj <mseraj@xxxxxxxxxxx>
Signed-off-by: Debjit Ghosh <dghosh@xxxxxxxxxxx>
Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxx>
Signed-off-by: Rajat Jain <rajatjain@xxxxxxxxxxx>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
---
drivers/i2c/busses/Kconfig | 11 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-sam.c | 942 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 954 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-sam.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5c3993b..eeac4b2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -833,6 +833,17 @@ config I2C_SH7760
This driver can also be built as a module. If so, the module
will be called i2c-sh7760.
+config I2C_SAM
+ tristate "Juniper SAM FPGA I2C Controller"
+ select I2C_MUX
+ depends on MFD_JUNIPER_SAM || MFD_JUNIPER_CBC
+ help
+ This driver supports the I2C interfaces on the Juniper SAM FPGA
+ which is present on the relevant Juniper platforms.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-sam.
+
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
depends on HAS_DMA
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 37f2819..b99b229 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_I2C_QUP) += i2c-qup.o
obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
+obj-$(CONFIG_I2C_SAM) += i2c-sam.o
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
diff --git a/drivers/i2c/busses/i2c-sam.c b/drivers/i2c/busses/i2c-sam.c
new file mode 100644
index 0000000..1ec930a
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sam.c
@@ -0,0 +1,942 @@
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c-mux.h>
+#include <linux/mfd/sam.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#define SAM_DEB1(dev, fmt, args...) do { \
+ if (sam_debug >= 1) \
+ dev_err(dev, fmt, ## args); \
+ } while (0)
+#define SAM_DEB2(dev, fmt, args...) do { \
+ if (sam_debug >= 2) \
+ dev_err(dev, fmt, ## args); \
+ } while (0)
+#define SAM_DEB3(dev, fmt, args...) do { \
+ if (sam_debug >= 3) \
+ dev_err(dev, fmt, ## args); } \
+ while (0)
+
+static int sam_debug;
+
+#define DRIVER_DESC "SAM FPGA I2C Driver"
+#define DRIVER_VERSION "0.2"
+#define DRIVER_AUTHOR "Maryam Seraj <mseraj@xxxxxxxxxxx>"
+
+#define SAM_FPGA_MODULE_NAME "i2c-sam"
+
+#define SAM_I2C_MUX_MAX_CHAN 8
+
+#define SAM_I2C_DEV_ADDR_MASK 0x7f
+#define SAM_I2C_TBL_ENTRY_CMDS_NUM 2
+
+#define SAM_I2C_CMD_TABLE_SZ 256
+
+#define SAM_I2C_STS_DONE (1 << 0)
+#define SAM_I2C_STS_PRIO_DONE (1 << 1)
+#define SAM_I2C_STS_RUNNING (1 << 2)
+#define SAM_I2C_STS_PRIO_RUNNING (1 << 3)
+#define SAM_I2C_STS_ERR (1 << 4)
+#define SAM_I2C_STS_PRIO_ERR (1 << 5)
+#define SAM_I2C_STS_RDY (1 << 6)
+#define SAM_I2C_STS_TR_TIMEOUT (1 << 7)
+#define SAM_I2C_STS_CMD_TIMEOUT (1 << 8)
+#define SAM_I2C_STS_CMD_TABLE_TIMEOUT (1 << 9)
+
+#define SAM_I2C_STS_CLEAR_MASK (SAM_I2C_STS_DONE \
+ | SAM_I2C_STS_PRIO_DONE \
+ | SAM_I2C_STS_TR_TIMEOUT \
+ | SAM_I2C_STS_CMD_TIMEOUT \
+ | SAM_I2C_STS_CMD_TABLE_TIMEOUT \
+ | SAM_I2C_STS_ERR \
+ | SAM_I2C_STS_PRIO_ERR)
+#define SAM_I2C_STS_CLEAR(x) (((x) & ~0x3fb3) | SAM_I2C_STS_CLEAR_MASK)
+
+#define SAM_I2C_STS_TIMEOUT (SAM_I2C_STS_TR_TIMEOUT \
+ | SAM_I2C_STS_CMD_TIMEOUT \
+ | SAM_I2C_STS_CMD_TABLE_TIMEOUT)
+
+#define SAM_I2C_DONE(s) ((s) & (SAM_I2C_STS_DONE | SAM_I2C_STS_ERR \
+ | SAM_I2C_STS_TIMEOUT))
+
+#define SAM_I2C_CTRL_RESET (1 << 0)
+#define SAM_I2C_CTRL_GO (1 << 1)
+#define SAM_I2C_CTRL_PRIO_GO (1 << 2)
+#define SAM_I2C_CTRL_ABORT (1 << 3)
+#define SAM_I2C_CTRL_PRIO_ABORT (1 << 4)
+
+/* Priority ctrl & status bits are offset +1 from the regular */
+#define STS_DONE(p) BIT(0 + (p))
+#define STS_RUNNING(p) BIT(2 + (p))
+#define STS_ERR(p) BIT(4 + (p))
+#define CTRL_GO(p) BIT(1 + (p))
+#define CTRL_ABORT(p) BIT(3 + (p))
+#define STS_I2C_DONE(s, p) ((s) & (STS_DONE(p) | STS_ERR(p) \
+ | SAM_I2C_STS_TIMEOUT))
+
+struct sam_i2c_data {
+ void __iomem *membase;
+ void __iomem *masterbase;
+ int first_master;
+ int num_master;
+ int mux_channels;
+ u32 *speed; /* bit mask, 1 for high speed */
+ bool prio;
+ bool reverse_fill;
+ struct i2c_adapter **adap;
+ struct device *dev;
+ int irq;
+ struct sam_platform_data *pdata;
+};
+
+struct sam_i2c_adapdata {
+ void __iomem *membase;
+ void __iomem *masterbase;
+ int channel;
+ int mux_channels;
+ int mux_select;
+ u32 speed; /* bit mask, same as above */
+ int prio;
+ bool reverse_fill;
+ struct i2c_adapter adap;
+ struct i2c_mux_core *muxc;
+ wait_queue_head_t wait;
+ u32 status;
+ u32 control;
+ bool done;
+ bool polling;
+};
+
+/**************************** i2c stuff *****************************/
+
+#define SAM_FPGA_MUX_NAME "sam-fpga-mux"
+
+enum i2c_accel_cmd_bits_s {
+ I2C_WRITE, /* 000 */
+ I2C_READ, /* 001 */
+ I2C_WRITE_STOP, /* 010 */
+ I2C_READ_STOP, /* 011 */
+ I2C_WRITE_REPSTART, /* 100 */
+ I2C_READ_REPSTART /* 101 */
+};
+
+#define I2C_CMD_STOP_BIT (1 << 1)
+#define I2C_CMD_REPSTART_BIT (1 << 2)
+
+#define PER_MASTER_MEM 0x1000
+#define I2C_OPTIONS_BASE 0x2000
+#define MASTER_MEM_BASE 0x8000
+
+#define CMD_ADDR(s, idx) ((s)->masterbase + 0x0000 + \
+ PER_MASTER_MEM * (s)->channel + \
+ (idx) * sizeof(u32))
+#define RES_ADDR(s, idx) ((s)->masterbase + 0x0400 + \
+ PER_MASTER_MEM * (s)->channel + \
+ (idx) * sizeof(u32))
+#define CMD_PRI_ADDR(s, idx) ((s)->masterbase + 0x0800 + \
+ PER_MASTER_MEM * (s)->channel + \
+ (idx) * sizeof(u32))
+#define RES_PRI_ADDR(s, idx) ((s)->masterbase + 0x0c00 + \
+ PER_MASTER_MEM * (s)->channel + \
+ (idx) * sizeof(u32))
+#define CTRL_ADDR(s) ((s)->membase + 0x2400 + 8 * (s)->channel)
+#define STAT_ADDR(s) ((s)->membase + 0x2404 + 8 * (s)->channel)
+
+#define sam_i2c_stat_clear(adata, val) \
+ do { \
+ iowrite32(SAM_I2C_STS_CLEAR(val), STAT_ADDR(adata)); \
+ ioread32(STAT_ADDR(adata)); \
+ } while (0)
+
+static int sam_i2c_wait_rdy(struct i2c_adapter *adap)
+{
+ struct sam_i2c_adapdata *adata = i2c_get_adapdata(adap);
+ u32 val;
+ unsigned long timeout;
+
+ val = ioread32(STAT_ADDR(adata));
+ if ((val & SAM_I2C_STS_RDY) && !(val & STS_RUNNING(adata->prio)))
+ return 0;
+
+ if (val & STS_RUNNING(adata->prio)) {
+ iowrite32(adata->control | CTRL_ABORT(adata->prio),
+ CTRL_ADDR(adata));
+ ioread32(CTRL_ADDR(adata));
+ udelay(10);
+ iowrite32(adata->control, CTRL_ADDR(adata));
+ ioread32(CTRL_ADDR(adata));
+ udelay(100);
+ }
+
+ timeout = jiffies + adap->timeout;
+ adata->status = 0;
+ do {
+ val = ioread32(STAT_ADDR(adata)) | adata->status;
+ if ((val & SAM_I2C_STS_RDY) &&
+ !(val & STS_RUNNING(adata->prio)))
+ return 0;
+
+ if (adata->polling) {
+ udelay(50);
+ } else {
+ adata->done = false;
+ adata->status = 0;
+ wait_event_timeout(adata->wait, adata->done,
+ adap->timeout);
+ }
+
+ } while (time_before(jiffies, timeout));
+
+ return -EBUSY;
+}
+
+int sam_i2c_calc_start_entry(struct i2c_msg *msgs, int num, int reverse_fill)
+{
+ int i, len = 0;
+
+ /* Filling the table from start (offset 0) ? */
+ if (!reverse_fill)
+ return 0;
+
+ /* Calculate required table size from the message sizes */
+ if (num == 1 && msgs[0].len == 0)
+ len = 1;
+ else
+ for (i = 0; i < num; i++)
+ if (msgs[i].flags & I2C_M_RECV_LEN)
+ len += (I2C_SMBUS_BLOCK_MAX + 1);
+ else
+ len += msgs[i].len;
+
+ if (len > SAM_I2C_CMD_TABLE_SZ * 2)
+ return -E2BIG;
+
+ /* Always start from Command 0 */
+ return (SAM_I2C_CMD_TABLE_SZ * 2 - len) / 2;
+}
+
+static int sam_i2c_cmd_init(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ struct sam_i2c_adapdata *adata = i2c_get_adapdata(adap);
+ struct device *dev = &adap->dev;
+ struct i2c_msg *msg;
+ int curmsg, cmds = 0;
+ int addr, i, len = 0, table_offset = 0;
+ u32 cmd_entry;
+ bool read;
+ u8 group;
+ u32 idx;
+ u8 cmd;
+
+ group = adata->mux_select;
+ addr = msgs[0].addr & SAM_I2C_DEV_ADDR_MASK;
+ cmd_entry = (group << 29) | (addr << 22);
+
+ /* Zero CMD table */
+ memset_io(CMD_ADDR(adata, 0), 0, SAM_I2C_CMD_TABLE_SZ * sizeof(u32));
+
+ idx = sam_i2c_calc_start_entry(msgs, num, adata->reverse_fill);
+ if (idx < 0)
+ return idx;
+
+ table_offset = idx;
+
+ for (curmsg = 0; curmsg < num; curmsg++) {
+ msg = &msgs[curmsg];
+ read = msg->flags & I2C_M_RD;
+
+ SAM_DEB1(dev, " [%02d] %s %d bytes addr %#02x\n",
+ curmsg, read ? "RD" : "WR",
+ msg->len, addr);
+
+ len = msg->len;
+ if (len == 0 && curmsg == 0 && num == 1) {
+ /*
+ * SMBus quick command, special case
+ *
+ * Always read; we don't want to risk that
+ * a "WRITE_STOP" command as only command
+ * would actually write anything into the chip.
+ */
+ cmd = I2C_READ_STOP;
+ cmd_entry |= cmd << 19;
+ cmds = 1;
+ break;
+ }
+ /*
+ * If the message is a SMBus block read message, read up to the
+ * maximum block length. The command should succeed at least up
+ * to the real block length, which will be returned in the first
+ * data byte.
+ */
+ if (read && (msg->flags & I2C_M_RECV_LEN))
+ len = I2C_SMBUS_BLOCK_MAX + 1;
+ for (i = 0; i < len; i++) {
+ cmd = read ? I2C_READ : I2C_WRITE;
+ if (i == len - 1) {
+ if (curmsg == num - 1)
+ cmd |= I2C_CMD_STOP_BIT;
+ else
+ cmd |= I2C_CMD_REPSTART_BIT;
+ }
+
+ if ((cmds % SAM_I2C_TBL_ENTRY_CMDS_NUM) == 0) {
+ /* cmd0/data0 */
+ cmd_entry |= cmd << 19;
+ if (!read)
+ cmd_entry |= (msg->buf[i] << 11);
+ } else {
+ /* cmd1/data1 */
+ cmd_entry |= cmd << 8;
+ if (!read)
+ cmd_entry |= msg->buf[i];
+ }
+ cmds++;
+ if (cmds % SAM_I2C_TBL_ENTRY_CMDS_NUM == 0) {
+ /*
+ * One command entry is done!
+ * Write it to the command table and start
+ * putting together the next entry for
+ * the same current i2c command, if needed.
+ */
+ SAM_DEB2(dev,
+ "reg-offset cmd_entry = 0x%08x, cmds = %d, @ %p\n",
+ cmd_entry, cmds, CMD_ADDR(adata, idx));
+
+ iowrite32(cmd_entry, CMD_ADDR(adata, idx));
+ ioread32(CMD_ADDR(adata, idx));
+ idx++;
+
+ /* clean out everything but group and address */
+ cmd_entry &= 0xFFC00000;
+ }
+ }
+ }
+ /*
+ * Zero out any remaining cmd/data part of the last
+ * command entry into the command table of the given
+ * master before kicking off the i2c engine for this
+ * master.
+ */
+ if (cmds % SAM_I2C_TBL_ENTRY_CMDS_NUM != 0) {
+ cmd_entry &= 0xFFFFF800;
+
+ SAM_DEB1(dev, "rest of cmd_entry = 0x%08x, cmds = %d, @ %p\n",
+ cmd_entry, cmds, CMD_ADDR(adata, idx));
+
+ if (idx >= SAM_I2C_CMD_TABLE_SZ)
+ return -E2BIG;
+
+ iowrite32(cmd_entry, CMD_ADDR(adata, idx));
+ ioread32(CMD_ADDR(adata, idx));
+ idx++;
+ if (idx < SAM_I2C_CMD_TABLE_SZ) {
+ iowrite32(0, CMD_ADDR(adata, idx));
+ ioread32(CMD_ADDR(adata, idx));
+ }
+ }
+ return table_offset;
+}
+
+static u32 i2c_sam_wait_results(struct i2c_adapter *adap)
+{
+ struct sam_i2c_adapdata *adata = i2c_get_adapdata(adap);
+ struct device *dev = &adap->dev;
+ u32 val;
+
+ if (adata->polling) {
+ unsigned long timeout = jiffies + adap->timeout;
+
+ /*
+ * Poll for results.
+ * Only wait a short time per loop to avoid long access times.
+ * At 100kHz, a single byte transfer takes about 100 uS,
+ * so we don't want to wait much longer than that.
+ */
+ do {
+ /*
+ * We should really use usleep_range() here, but that
+ * does not work and causes the system to lock up.
+ * msleep() is slow, so use an active wait loop instead.
+ */
+ udelay(50);
+ val = ioread32(STAT_ADDR(adata));
+ SAM_DEB1(dev, "status = 0x%08x @%p\n",
+ val, STAT_ADDR(adata));
+ if (STS_I2C_DONE(val, adata->prio))
+ break;
+ } while (time_before(jiffies, timeout));
+ } else {
+ if (!wait_event_timeout(adata->wait, adata->done,
+ adap->timeout))
+ val = ioread32(STAT_ADDR(adata));
+ else
+ val = ioread32(STAT_ADDR(adata)) | adata->status;
+ }
+
+ sam_i2c_stat_clear(adata, val);
+
+ return val;
+}
+
+static int sam_i2c_read_data(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num, int table_offset)
+{
+ struct sam_i2c_adapdata *adata = i2c_get_adapdata(adap);
+ int offset = table_offset * 2;
+ struct device *dev = &adap->dev;
+ struct i2c_msg *msg;
+ u32 val, data;
+ bool valid;
+ int i, len;
+
+ msg = &msgs[num - 1];
+ len = msg->len;
+
+ if (num > 1)
+ offset += msgs[0].len;
+
+ SAM_DEB1(dev, "Reading %d bytes\n", len);
+
+ for (i = offset & 0xfffffffe; i < len + offset; i++) {
+ val = ioread32(RES_ADDR(adata, i / 2));
+ SAM_DEB2(dev, "data = 0x%08x @%p\n",
+ val, RES_ADDR(adata, i / 2));
+ if (i >= offset) {
+ data = (val >> 11) & 0xff; /* data_0 */
+ valid = val & 0x00200000; /* valid_0 */
+ if (!valid)
+ return -EIO;
+ msg->buf[i - offset] = data;
+ if (i == offset &&
+ (msg->flags & I2C_M_RECV_LEN)) {
+ if (data == 0 ||
+ data > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+ SAM_DEB1(dev, "SMBus block data, %d bytes\n",
+ data);
+ len += data;
+ }
+ }
+ if (++i >= len + offset)
+ break;
+ if (i >= offset) {
+ data = val & 0xff; /* data_1 */
+ valid = val & 0x00000400; /* valid_1 */
+ if (!valid)
+ return -EIO;
+ msg->buf[i - offset] = data;
+ if (i == offset &&
+ (msg->flags & I2C_M_RECV_LEN)) {
+ if (data == 0 ||
+ data > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+ SAM_DEB1(dev, "SMBus block data, %d bytes\n",
+ data);
+ len += data;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int sam_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct sam_i2c_adapdata *adata = i2c_get_adapdata(adap);
+ int ret, table_offset;
+ u32 val;
+
+ ret = sam_i2c_wait_rdy(adap);
+ if (ret < 0)
+ return ret;
+
+ ret = sam_i2c_cmd_init(adap, msgs, num);
+ if (ret < 0)
+ return ret;
+ table_offset = ret & 0xff;
+
+ sam_i2c_stat_clear(adata, ioread32(STAT_ADDR(adata)));
+
+ /*
+ * Done with setting up the command table, now kick
+ * off this transaction before waiting for the results.
+ */
+
+ adata->done = false;
+ adata->status = 0;
+
+ iowrite32(adata->control | CTRL_GO(adata->prio) | table_offset << 24,
+ CTRL_ADDR(adata));
+ ioread32(CTRL_ADDR(adata)); /* read back to flush */
+
+ val = i2c_sam_wait_results(adap);
+ if (val & STS_ERR(adata->prio)) {
+ dev_err(&adap->dev, "i2c transaction error\n");
+ return -EIO;
+ }
+ if ((val & SAM_I2C_STS_TIMEOUT) || !(val & STS_DONE(adata->prio))) {
+ SAM_DEB1(&adap->dev,
+ "i2c transaction timeout, status=0x%x\n", val);
+ return -ETIMEDOUT;
+ }
+
+ SAM_DEB1(&adap->dev, "i2c transaction completed!!!\n");
+
+ /* SMBus quick command, special case */
+ if (num == 1 && msgs[0].len == 0) {
+ val = ioread32(RES_ADDR(adata, table_offset));
+ SAM_DEB1(&adap->dev, "quick cmd: data = 0x%08x\n", val);
+ return val & 0x00200000 ? 1 : -EIO;
+ }
+ /*
+ * If this was a "read" request, go get the data.
+ * Otherwise, we're done here!
+ */
+ if (msgs[num - 1].flags & I2C_M_RD) {
+ ret = sam_i2c_read_data(adap, msgs, num, table_offset);
+ if (ret < 0)
+ return ret;
+ }
+
+ SAM_DEB1(&adap->dev, "Returning %d\n", num);
+ return num;
+}
+
+static u32 sam_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
+ | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm sam_i2c_algo = {
+ .master_xfer = sam_i2c_xfer,
+ .functionality = sam_i2c_func,
+};
+
+/*
+ * This is where the SAM I2C-accel needs to be initialized.
+ */
+static int sam_i2c_init_adap(struct i2c_adapter *adap)
+{
+ struct sam_i2c_adapdata *adata = i2c_get_adapdata(adap);
+ u32 val;
+
+ SAM_DEB1(&adap->dev, "bus_mstr = %d\n", adata->channel);
+
+ val = 0x00000f00;
+ val |= (adata->speed << 12) & 0x0000f000;
+ adata->control = val;
+ /*
+ * Set the i2c speed for ALL ports of this master and enable them all
+ */
+ iowrite32(val, CTRL_ADDR(adata));
+
+ return 0;
+}
+
+int sam_i2c_add_numbered_bus(struct i2c_adapter *adap)
+{
+ int rval;
+
+ SAM_DEB1(&adap->dev, "%s", __func__);
+
+ rval = sam_i2c_init_adap(adap);
+ if (rval)
+ return rval;
+
+ return i2c_add_numbered_adapter(adap);
+}
+/********** end of i2c adapter/accel stuff ************************************/
+
+/********** start of i2c accel mux/group stuff ********************************/
+static int sam_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
+{
+ struct sam_i2c_adapdata *adata = i2c_mux_priv(muxc);
+
+ if (!adata)
+ return -ENODEV;
+ adata->mux_select = chan;
+
+ return 0;
+}
+
+static int sam_i2c_mux_init(struct i2c_adapter *adap)
+{
+ struct sam_i2c_adapdata *adata = i2c_get_adapdata(adap);
+ int chan, ret;
+
+ SAM_DEB1(&adap->dev, "%s Begin\n", __func__);
+
+ adata->muxc = i2c_mux_alloc(adap, &adap->dev, adata->mux_channels, 0, 0,
+ sam_i2c_mux_select, NULL);
+ if (!adata->muxc)
+ return -ENOMEM;
+ adata->muxc->priv = adata;
+
+ for (chan = 0; chan < adata->mux_channels; chan++) {
+ ret = i2c_mux_add_adapter(adata->muxc, 0, chan, 0);
+ if (ret) {
+ dev_err(&adap->dev, "Failed to add adapter %d\n", chan);
+ i2c_mux_del_adapters(adata->muxc);
+ return ret;
+ }
+ }
+
+ SAM_DEB1(&adap->dev, "%s End\n", __func__);
+
+ return 0;
+}
+
+/********** end of i2c accel mux/group stuff **********************************/
+
+static void sam_core_of_init_options(struct device *dev,
+ struct sam_i2c_data *sam)
+{
+ const __be32 *opt;
+ int len, i;
+
+ opt = of_get_property(dev->of_node, "i2c-options", &len);
+ if (!opt || len > 4 * sizeof(u32))
+ return;
+
+ for (i = 0; i < len; i += sizeof(u32))
+ iowrite32(be32_to_cpup(opt++),
+ sam->membase + I2C_OPTIONS_BASE + i);
+}
+
+static int sam_core_of_init(struct device *dev, struct sam_i2c_data *sam,
+ struct resource *res)
+{
+ int err;
+ int num_master, max_masters;
+ u32 speed, mux_channels, val, master_offset = MASTER_MEM_BASE;
+ int i, len;
+ const __be32 *bus_range, *regs;
+ struct device_node *child;
+ u32 master, mux;
+
+ num_master = ioread32(sam->membase + 0x0c);
+ sam->first_master = -1;
+
+ err = of_property_read_u32(dev->of_node, "master-offset", &val);
+ if (!err)
+ if (val + PER_MASTER_MEM <= resource_size(res)) {
+ master_offset = val;
+ dev_info(dev, "Master offset changed to 0x%08x", val);
+ }
+
+ sam->masterbase = sam->membase + master_offset;
+ max_masters = (resource_size(res) - master_offset) / PER_MASTER_MEM;
+
+ if (num_master <= 0 || num_master > max_masters)
+ return -EINVAL;
+ sam->num_master = num_master;
+
+ bus_range = of_get_property(dev->of_node, "i2c-bus-range", &len);
+ if (bus_range) {
+ if (len != 2 * sizeof(u32))
+ return -EINVAL;
+ sam->first_master = be32_to_cpu(bus_range[0]);
+ num_master = be32_to_cpu(bus_range[1]) - sam->first_master + 1;
+ if (num_master <= 0 || num_master > sam->num_master)
+ return -EINVAL;
+ sam->num_master = num_master;
+ }
+
+ sam->speed = devm_kcalloc(dev, sam->num_master, sizeof(u32),
+ GFP_KERNEL);
+ if (!sam->speed)
+ return -ENOMEM;
+
+ sam->adap = devm_kcalloc(dev, sam->num_master,
+ sizeof(struct i2c_adapter *), GFP_KERNEL);
+ if (!sam->adap)
+ return -ENOMEM;
+
+ /* Set default i2c speed to 100kHz for all channels */
+ for (i = 0; i < sam->num_master; i++)
+ sam->speed[i] = (1 << SAM_I2C_MUX_MAX_CHAN) - 1;
+
+ if (!dev->of_node) {
+ /*
+ * Use default from platform data if the there is no FDT.
+ * TODO: Use FDT once it is available
+ */
+ sam->mux_channels = sam->pdata ?
+ sam->pdata->i2c_mux_channels : 2;
+ dev_warn(dev,
+ "No FDT node for SAM, using default (%d)\n",
+ sam->mux_channels);
+ return 0;
+ }
+
+ err = of_property_read_u32(dev->of_node, "mux-channels", &mux_channels);
+ if (err || !mux_channels || mux_channels > SAM_I2C_MUX_MAX_CHAN)
+ return -EINVAL;
+ sam->mux_channels = mux_channels;
+ sam->reverse_fill = of_property_read_bool(dev->of_node, "reverse-fill");
+ sam->prio = of_property_read_bool(dev->of_node, "priority-tables");
+ /* Priority tables are offset with 0x800 from the regular tables */
+ if (sam->prio)
+ sam->masterbase += 0x800;
+
+ for_each_child_of_node(dev->of_node, child) {
+ regs = of_get_property(child, "reg", &len);
+ if (!regs || len != 2 * sizeof(u32)) {
+ dev_err(dev, "did not find reg property or bad size\n");
+ return -EINVAL;
+ }
+ err = of_property_read_u32(child, "speed", &speed);
+ if (err || !speed)
+ continue;
+ if (speed != 100000 && speed != 400000) {
+ dev_err(dev, "Bad speed %d\n", speed);
+ return -EINVAL;
+ }
+ master = be32_to_cpu(regs[0]);
+ mux = be32_to_cpu(regs[1]);
+ if (master >= sam->num_master || mux >= sam->mux_channels) {
+ dev_err(dev,
+ "master/mux %d/%d out of range\n",
+ master, mux);
+ return -EINVAL;
+ }
+ if (speed == 400000)
+ sam->speed[master] &= ~(1 << mux);
+ }
+
+ sam_core_of_init_options(dev, sam);
+
+ return 0;
+}
+
+static struct i2c_adapter *sam_i2c_init_one(struct sam_i2c_data *sam,
+ int channel)
+{
+ struct device *dev = sam->dev;
+ struct sam_i2c_adapdata *adata;
+ int err;
+
+ adata = devm_kzalloc(dev, sizeof(*adata), GFP_KERNEL);
+ if (!adata)
+ return ERR_PTR(-ENOMEM);
+
+ init_waitqueue_head(&adata->wait);
+ adata->adap.owner = THIS_MODULE;
+ adata->adap.algo = &sam_i2c_algo;
+ adata->adap.nr = (sam->first_master >= 0) ?
+ sam->first_master + channel : -1;
+ adata->adap.timeout = HZ / 5;
+ adata->channel = channel;
+ adata->mux_channels = sam->mux_channels;
+ adata->membase = sam->membase;
+ adata->masterbase = sam->masterbase;
+ adata->speed = sam->speed[channel];
+ adata->polling = (sam->irq < 0);
+ adata->reverse_fill = sam->reverse_fill;
+ adata->prio = sam->prio & 1;
+ i2c_set_adapdata(&adata->adap, adata);
+ snprintf(adata->adap.name, sizeof(adata->adap.name),
+ "%s:%d", dev_name(dev), channel);
+
+ adata->adap.dev.parent = dev;
+ err = sam_i2c_add_numbered_bus(&adata->adap);
+ if (err)
+ goto error;
+
+ err = sam_i2c_mux_init(&adata->adap);
+ if (err)
+ goto err_remove;
+
+ return &adata->adap;
+
+err_remove:
+ i2c_del_adapter(&adata->adap);
+error:
+ return ERR_PTR(err);
+}
+
+static void sam_i2c_cleanup_one(struct i2c_adapter *adap)
+{
+ struct sam_i2c_adapdata *adata = i2c_get_adapdata(adap);
+
+ i2c_mux_del_adapters(adata->muxc);
+ i2c_del_adapter(adap);
+}
+
+static irqreturn_t sam_i2c_irq_handler(int irq, void *data)
+{
+ struct sam_i2c_data *sam = data;
+ struct sam_platform_data *pdata = sam->pdata;
+ struct sam_i2c_adapdata *adata;
+ int bit;
+ u32 val, status, wake_status;
+ u32 mask = (1 << sam->num_master) - 1;
+
+ status = pdata->irq_status(sam->dev->parent, SAM_IRQ_I2C,
+ sam->irq) & mask;
+ do {
+ wake_status = status;
+ /* Clear the 'done' bits */
+ while (status) {
+ bit = __ffs(status);
+ status &= ~BIT(bit);
+ adata = i2c_get_adapdata(sam->adap[bit]);
+ val = ioread32(STAT_ADDR(adata));
+ if (STS_I2C_DONE(val, adata->prio)) {
+ sam_i2c_stat_clear(adata, val);
+ if (!adata->done) {
+ adata->done = true;
+ adata->status = val;
+ }
+ }
+ }
+ /*
+ * Clear the status bits *after* the done status is cleared,
+ * as otherwise this will generate another unused interrupt.
+ * On the CBC this will also clear the MSI INT_ACCELL.
+ */
+ pdata->irq_status_clear(sam->dev->parent, SAM_IRQ_I2C, sam->irq,
+ wake_status);
+
+ /* Now wake the blocked transactions */
+ while (wake_status) {
+ bit = __ffs(wake_status);
+ wake_status &= ~BIT(bit);
+ adata = i2c_get_adapdata(sam->adap[bit]);
+ wake_up(&adata->wait);
+ }
+
+ /* Recheck the status again, as we might miss an MSI in
+ * the window from the last check and the clear of the
+ * pending interrupts. This does not affect the SAM INTx.
+ */
+ status = pdata->irq_status(sam->dev->parent, SAM_IRQ_I2C,
+ sam->irq) & mask;
+ } while (status);
+
+ return IRQ_HANDLED;
+}
+
+static const struct of_device_id sam_i2c_of_match[] = {
+ { .compatible = "jnx,i2c-sam",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, sam_i2c_of_match);
+
+
+static int sam_i2c_probe(struct platform_device *pdev)
+{
+ int err;
+ int i;
+ struct sam_i2c_data *sam;
+ struct i2c_adapter *adap;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct sam_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ /*
+ * Allocate memory for the SAM FPGA info
+ */
+ sam = devm_kzalloc(dev, sizeof(*sam), GFP_KERNEL);
+ if (!sam)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, sam);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ if (pdata)
+ sam->irq = platform_get_irq(pdev, 0);
+
+ sam->membase = devm_ioremap_nocache(dev, res->start,
+ resource_size(res));
+ if (!sam->membase)
+ return -ENOMEM;
+
+ sam->dev = dev;
+ sam->pdata = pdata;
+
+ err = sam_core_of_init(dev, sam, res);
+ if (err)
+ return err;
+
+ /***** i2c init *****/
+
+ for (i = 0; i < sam->num_master; i++) {
+ adap = sam_i2c_init_one(sam, i);
+ if (IS_ERR(adap)) {
+ err = PTR_ERR(adap);
+ dev_err(dev,
+ "Failed to initialize adapter %d [base %d, index %d]: %d\n",
+ sam->first_master + i, sam->first_master, i,
+ err);
+ goto err_remove;
+ }
+ sam->adap[i] = adap;
+ }
+
+ if (sam->irq >= 0) {
+ err = devm_request_any_context_irq(dev, sam->irq,
+ sam_i2c_irq_handler, 0,
+ dev_name(dev), sam);
+ if (err < 0) {
+ dev_err(dev, "Failed to request interrupt %d: %d\n",
+ sam->irq, err);
+ goto err_remove;
+ }
+ pdata->enable_irq(dev->parent, SAM_IRQ_I2C, sam->irq,
+ (1 << sam->num_master) - 1);
+ }
+
+ return 0;
+
+err_remove:
+ for (i--; i >= 0; i--)
+ sam_i2c_cleanup_one(sam->adap[i]);
+ return err;
+}
+
+static int sam_i2c_remove(struct platform_device *pdev)
+{
+ struct sam_i2c_data *sam = platform_get_drvdata(pdev);
+ struct sam_platform_data *pdata = sam->pdata;
+ int i;
+
+ if (sam->irq >= 0 && pdata)
+ pdata->disable_irq(pdev->dev.parent, SAM_IRQ_I2C, sam->irq,
+ (1 << sam->num_master) - 1);
+ for (i = 0; i < sam->num_master; i++)
+ sam_i2c_cleanup_one(sam->adap[i]);
+
+ return 0;
+}
+
+static struct platform_driver sam_i2c_driver = {
+ .driver = {
+ .name = "i2c-sam",
+ .owner = THIS_MODULE,
+ .of_match_table = sam_i2c_of_match,
+ },
+ .probe = sam_i2c_probe,
+ .remove = sam_i2c_remove,
+};
+
+module_platform_driver(sam_i2c_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+
+module_param(sam_debug, int, S_IWUSR | S_IRUGO);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
