[PATCH 2/2] i2c: rk3x: Fix variable 'min_total_ns' unused warning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch fixs the following warning:
drivers/i2c/busses/i2c-rk3x.c: In function 'rk3x_i2c_v1_calc_timings':
drivers/i2c/busses/i2c-rk3x.c:745:41: warning: variable 'min_total_ns' set but not used [-Wunused-but-set-variable]

Signed-off-by: David Wu <david.wu@xxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-rk3x.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 965477e..50702c7 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -742,7 +742,7 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
 				    struct i2c_timings *t,
 				    struct rk3x_i2c_calced_timings *t_calc)
 {
-	unsigned long min_low_ns, min_high_ns, min_total_ns;
+	unsigned long min_low_ns, min_high_ns;
 	unsigned long min_setup_start_ns, min_setup_data_ns;
 	unsigned long min_setup_stop_ns, max_hold_data_ns;
 
@@ -793,7 +793,6 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
 
 	/* These are the min dividers needed for min hold times. */
 	min_div_for_hold = (min_low_div + min_high_div);
-	min_total_ns = min_low_ns + min_high_ns;
 
 	/*
 	 * This is the maximum divider so we don't go over the maximum.
-- 
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux