Introduce a function that checks for valid status codes depending
on the phase of a transmit or receive. Also add all existing status
codes and improve error handling for various states.
The Octeon TWSI has an "assert acknowledge" bit (TWSI_CTL_AAK) that
is required to be set in master receive mode until the last byte is
requested. The state check needs to consider if this bit was set.
Signed-off-by: Jan Glauber <jglauber@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-octeon.c | 129 +++++++++++++++++++++++++++++++++-------
1 file changed, 106 insertions(+), 23 deletions(-)
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 4275007..471d06e 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -55,13 +55,35 @@
#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */
#define TWSI_CTL_AAK 0x04 /* Assert ACK */
-/* Some status values */
+/* Status values */
+#define STAT_ERROR 0x00
#define STAT_START 0x08
-#define STAT_RSTART 0x10
+#define STAT_REP_START 0x10
#define STAT_TXADDR_ACK 0x18
+#define STAT_TXADDR_NAK 0x20
#define STAT_TXDATA_ACK 0x28
+#define STAT_TXDATA_NAK 0x30
+#define STAT_LOST_ARB_38 0x38
#define STAT_RXADDR_ACK 0x40
+#define STAT_RXADDR_NAK 0x48
#define STAT_RXDATA_ACK 0x50
+#define STAT_RXDATA_NAK 0x58
+#define STAT_SLAVE_60 0x60
+#define STAT_LOST_ARB_68 0x68
+#define STAT_SLAVE_70 0x70
+#define STAT_LOST_ARB_78 0x78
+#define STAT_SLAVE_80 0x80
+#define STAT_SLAVE_88 0x88
+#define STAT_GENDATA_ACK 0x90
+#define STAT_GENDATA_NAK 0x98
+#define STAT_SLAVE_A0 0xA0
+#define STAT_SLAVE_A8 0xA8
+#define STAT_LOST_ARB_B0 0xB0
+#define STAT_SLAVE_LOST 0xB8
+#define STAT_SLAVE_NAK 0xC0
+#define STAT_SLAVE_ACK 0xC8
+#define STAT_AD2W_ACK 0xD0
+#define STAT_AD2W_NAK 0xD8
#define STAT_IDLE 0xF8
/* TWSI_INT values */
@@ -225,6 +247,67 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
return 0;
}
+static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
+{
+ u8 stat = octeon_i2c_stat_read(i2c);
+
+ switch (stat) {
+ /* Everything is fine */
+ case STAT_IDLE:
+ case STAT_AD2W_ACK:
+ case STAT_RXADDR_ACK:
+ case STAT_TXADDR_ACK:
+ case STAT_TXDATA_ACK:
+ return 0;
+
+ /* ACK allowed on pre-terminal bytes only */
+ case STAT_RXDATA_ACK:
+ if (!final_read)
+ return 0;
+ return -EIO;
+
+ /* NAK allowed on terminal byte only */
+ case STAT_RXDATA_NAK:
+ if (final_read)
+ return 0;
+ return -EIO;
+
+ /* Arbitration lost */
+ case STAT_LOST_ARB_38:
+ case STAT_LOST_ARB_68:
+ case STAT_LOST_ARB_78:
+ case STAT_LOST_ARB_B0:
+ return -EAGAIN;
+
+ /* Being addressed as slave, should back off & listen */
+ case STAT_SLAVE_60:
+ case STAT_SLAVE_70:
+ case STAT_GENDATA_ACK:
+ case STAT_GENDATA_NAK:
+ return -EOPNOTSUPP;
+
+ /* Core busy as slave */
+ case STAT_SLAVE_80:
+ case STAT_SLAVE_88:
+ case STAT_SLAVE_A0:
+ case STAT_SLAVE_A8:
+ case STAT_SLAVE_LOST:
+ case STAT_SLAVE_NAK:
+ case STAT_SLAVE_ACK:
+ return -EOPNOTSUPP;
+
+ case STAT_TXDATA_NAK:
+ return -EIO;
+ case STAT_TXADDR_NAK:
+ case STAT_RXADDR_NAK:
+ case STAT_AD2W_NAK:
+ return -ENXIO;
+ default:
+ dev_err(i2c->dev, "unhandled state: %d\n", stat);
+ return -EIO;
+ }
+}
+
/* calculate and set clock divisors */
static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
{
@@ -318,7 +401,7 @@ static int octeon_i2c_start(struct octeon_i2c *i2c)
}
data = octeon_i2c_stat_read(i2c);
- if ((data != STAT_START) && (data != STAT_RSTART)) {
+ if ((data != STAT_START) && (data != STAT_REP_START)) {
dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data);
return -EIO;
}
@@ -347,7 +430,6 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
const u8 *data, int length)
{
int i, result;
- u8 tmp;
result = octeon_i2c_start(i2c);
if (result)
@@ -361,14 +443,9 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
return result;
for (i = 0; i < length; i++) {
- tmp = octeon_i2c_stat_read(i2c);
-
- if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) {
- dev_err(i2c->dev,
- "%s: bad status before write (0x%x)\n",
- __func__, tmp);
- return -EIO;
- }
+ result = octeon_i2c_check_status(i2c, false);
+ if (result)
+ return result;
octeon_i2c_data_write(i2c, data[i]);
octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
@@ -397,7 +474,7 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
u8 *data, u16 *rlength, bool recv_len)
{
int i, result, length = *rlength;
- u8 tmp;
+ bool final_read = false;
if (length < 1)
return -EINVAL;
@@ -413,19 +490,21 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
if (result)
return result;
+ /* address OK ? */
+ result = octeon_i2c_check_status(i2c, false);
+ if (result)
+ return result;
+
for (i = 0; i < length; i++) {
- tmp = octeon_i2c_stat_read(i2c);
- if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) {
- dev_err(i2c->dev,
- "%s: bad status before read (0x%x)\n",
- __func__, tmp);
- return -EIO;
- }
+ /* for the last byte TWSI_CTL_AAK must not be set */
+ if (i + 1 == length)
+ final_read = true;
- if (i + 1 < length)
- octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_AAK);
- else
+ /* clear iflg to allow next event */
+ if (final_read)
octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+ else
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_AAK);
result = octeon_i2c_wait(i2c);
if (result)
@@ -441,6 +520,10 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
}
length += data[i];
}
+
+ result = octeon_i2c_check_status(i2c, final_read);
+ if (result)
+ return result;
}
*rlength = length;
return 0;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
