Re: [PATCH v5 2/2] i2c: rk3x: add i2c support for rk3399 soc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> The default frequency rate of function clock is 50M Hz, it can match
> F/S mode, but HS mode not. If use default rate 50M to get 1.7M
> scl-frequency rate , we could not get accurately 1.7M frequecy rate.
> The input-clk-rate is more higher, we get more accurately
> scl-frequency rate,  as 200M is a suitable input-clk-rate.
> 
> If 200M was used for F/S mode, it would increase power consumption, so
> add a option that could be configured from DT.

If I understand you correctly, couldn't you use clk_set_rate() depending
on the desired scl frequency which is already described in DT as
clock-frequency?

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux