From: David Daney <david.daney@xxxxxxxxxx>
If I2C_M_RECV_LEN is set consider the length byte.
Signed-off-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Jan Glauber <jglauber@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-octeon.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 519e328..6041cd7 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -315,16 +315,17 @@ static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
* @i2c: The struct octeon_i2c
* @target: Target address
* @data: Pointer to the location to store the data
- * @length: Length of the data
+ * @rlength: Length of the data
+ * @recv_len: flag for length byte
*
* The address is sent over the bus, then the data is read.
*
* Returns 0 on success, otherwise a negative errno.
*/
static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
- u8 *data, int length)
+ u8 *data, u16 *rlength, bool recv_len)
{
- int i, result;
+ int i, result, length = *rlength;
u8 tmp;
if (length < 1)
@@ -363,7 +364,17 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
return result;
data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
+ if (recv_len && i == 0) {
+ if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) {
+ dev_err(i2c->dev,
+ "%s: read len > I2C_SMBUS_BLOCK_MAX %d\n",
+ __func__, data[i]);
+ return -EIO;
+ }
+ length += data[i];
+ }
}
+ *rlength = length;
return 0;
}
@@ -390,7 +401,7 @@ static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
pmsg->len, pmsg->addr, i + 1, num);
if (pmsg->flags & I2C_M_RD)
ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
- pmsg->len);
+ &pmsg->len, pmsg->flags & I2C_M_RECV_LEN);
else
ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
pmsg->len);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
