On 01/15/2016 08:38 AM, Fu, Zhonghui wrote:
Now, PM core supports asynchronous suspend/resume mode for devices
during system suspend/resume, and the power state transition of one
device may be completed in separate kernel thread. PM core ensures
all power state transition dependency between devices. This patch
enables designware i2c controllers to suspend/resume asynchronously.
This will take advantage of multicore and improve system suspend/resume
speed. After enabling all i2c devices, i2c adapters and i2c controllers
on ASUS T100TA tablet, the system suspend-to-idle time is reduced to
about 510ms from 750ms, and the system resume time is reduced to about
790ms from 900ms.
Signed-off-by: Zhonghui Fu <zhonghui.fu@xxxxxxxxxxxxxxx>
---
Changes in v2:
- Move the device_enable_async_suspend() call into i2c_dw_proble()
drivers/i2c/busses/i2c-designware-core.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index ba9732c..5d6ad27 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -861,6 +861,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
init_completion(&dev->cmd_complete);
mutex_init(&dev->lock);
+ device_enable_async_suspend(dev->dev);
I'm aware Andy had concerns about about stability and you also mention
in another thread:
"if enable all LPSS devices suspend/resume asynchronously, the system
can't resume sometimes on ASUS T100TA(BayTrail-T SoC). But, I have
verified that the system can resume normally every time if enable only
i2c controller async mode and let other LPSS devices in sync mode on
ASUS T100TA.".
What I'm thinking would this change move things forward and help to find
out what potential underlying issues there are in LPSS code.
I'm fine with this I2C side change but can we assure we don't
accidentally enable the same on other LPSS devices before finding the
root cause for the crash?
--
Jarkko
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
