Request the SMBus base address index region once in piix4_probe. This
is particularly useful when using the multiplexed adapter in SB800 as
it avoids requesting and releasing the region on every transfer.
Signed-off-by: Christian Fetzer <fetzer.ch@xxxxxxxxx>
---
drivers/i2c/busses/i2c-piix4.c | 35 ++++++++++++++++++++++-------------
1 file changed, 22 insertions(+), 13 deletions(-)
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 35eeb0d..d866b58 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -125,6 +125,9 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
{ },
};
+/* SB800 globals */
+static unsigned short piix4_smb_idx_sb800;
+
struct i2c_piix4_adapdata {
unsigned short smba;
};
@@ -232,7 +235,6 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
const struct pci_device_id *id, u8 aux)
{
unsigned short piix4_smba;
- unsigned short smba_idx = 0xcd6;
u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
u8 i2ccfg, i2ccfg_offset = 0x10;
@@ -254,16 +256,10 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
else
smb_en = (aux) ? 0x28 : 0x2c;
- if (!request_region(smba_idx, 2, "smba_idx")) {
- dev_err(&PIIX4_dev->dev, "SMBus base address index region "
- "0x%x already in use!\n", smba_idx);
- return -EBUSY;
- }
- outb_p(smb_en, smba_idx);
- smba_en_lo = inb_p(smba_idx + 1);
- outb_p(smb_en + 1, smba_idx);
- smba_en_hi = inb_p(smba_idx + 1);
- release_region(smba_idx, 2);
+ outb_p(smb_en, piix4_smb_idx_sb800);
+ smba_en_lo = inb_p(piix4_smb_idx_sb800 + 1);
+ outb_p(smb_en + 1, piix4_smb_idx_sb800);
+ smba_en_hi = inb_p(piix4_smb_idx_sb800 + 1);
if (!smb_en) {
smb_en_status = smba_en_lo & 0x10;
@@ -616,16 +612,26 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
+ unsigned short smba_idx = 0xcd6;
int retval;
if ((dev->vendor == PCI_VENDOR_ID_ATI &&
dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
dev->revision >= 0x40) ||
- dev->vendor == PCI_VENDOR_ID_AMD)
+ dev->vendor == PCI_VENDOR_ID_AMD) {
+
+ if (!request_region(smba_idx, 2, "smba_idx")) {
+ dev_err(&dev->dev, "SMBus base address index region "
+ "0x%x already in use!\n", smba_idx);
+ return -EBUSY;
+ }
+ piix4_smb_idx_sb800 = smba_idx;
+
/* base address location etc changed in SB800 */
retval = piix4_setup_sb800(dev, id, 0);
- else
+ } else {
retval = piix4_setup(dev, id);
+ }
/* If no main SMBus found, give up */
if (retval < 0)
@@ -692,6 +698,9 @@ static void piix4_remove(struct pci_dev *dev)
piix4_adap_remove(piix4_aux_adapter, 1);
piix4_aux_adapter = NULL;
}
+
+ if (piix4_smb_idx_sb800)
+ release_region(piix4_smb_idx_sb800, 2);
}
static struct pci_driver piix4_driver = {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
