RE: [PATCH V6 6/6] dts/ls1043a: add LS1043ARDB board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: pku.leo@xxxxxxxxx [mailto:pku.leo@xxxxxxxxx] On Behalf Of Li Yang
> Sent: 2015年10月30日 4:33
> To: Hou Zhiqiang-B48286
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Catalin Marinas; Will Deacon;
> linux-i2c@xxxxxxxxxxxxxxx; linux-watchdog@xxxxxxxxxxxxxxx; linux-
> doc@xxxxxxxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx; Mark Rutland; Xie
> Shaohui-B21989; Jonathan Corbet; Sharma Bhupesh-B45370; Michael Turquette;
> wsa@xxxxxxxxxxxxx; sboyd@xxxxxxxxxxxxxx; wim@xxxxxxxxx; Song Wenbin-
> B53747; Wood Scott-B07421; Hu Mingkai-B21284; linux@xxxxxxxxxxxx
> Subject: Re: [PATCH V6 6/6] dts/ls1043a: add LS1043ARDB board support
> 
> On Fri, Oct 23, 2015 at 3:01 AM, Zhiqiang Hou <B48286@xxxxxxxxxxxxx>
> wrote:
> > From: Shaohui Xie <Shaohui.Xie@xxxxxxxxxxxxx>
> >
> > Signed-off-by: Shaohui Xie <Shaohui.Xie@xxxxxxxxxxxxx>
> > Signed-off-by: Mingkai Hu <Mingkai.Hu@xxxxxxxxxxxxx>
> > Signed-off-by: Wenbin Song <Wenbin.Song@xxxxxxxxxxxxx>
> > Signed-off-by: Hou Zhiqiang <B48286@xxxxxxxxxxxxx>
> > ---
> > V6: V5 V4 V3
> >  - No change.
> >
> > V2:
> >  - Remove the useless compatible "simple-bus" from cpld node.
> >
> >  arch/arm64/boot/dts/freescale/Makefile            |   2 +-
> >  arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 116
> > ++++++++++++++++++++++
> >  2 files changed, 117 insertions(+), 1 deletion(-)  create mode 100644
> > arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile
> > index 57b41c7..33b1e57 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -1,4 +1,4 @@
> > -dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
> > fsl-ls2080a-rdb.dtb fsl-ls2080a-simu.dtb
> > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
> > +fsl-ls2080a-rdb.dtb fsl-ls2080a-simu.dtb fsl-ls1043a-rdb.dtb
> 
> I tried to apply the patch, but it can not be applied due to the change
> from a depending ls2080 patch.  I will help to respin this patch and
> resend the three device tree related patches.

ok.

Thanks,
Zhiqiang
��.n��������+%������w��{.n�����{��-��)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux