Re: [PATCH-v5 RESEND 3/5] i2c: pxa: Add support for pxa910/988 & new configuration features

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 24, 2015 at 11:29:36AM +0530, Vaibhav Hiremath wrote:
> TWSI_ILCR & TWSI_IWCR registers are used to adjust clock rate
> of standard & fast mode in pxa910/988; so this patch adds these two new
> entries to "struct pxa_reg_layout" and "struct pxa_i2c".
> 
> As discussed in the previous patch-series, the idea here is to add standard
> DT properties for ilcr and iwcr configuration fields.
> In case of Master ilcr is used for low/high time and in case of slave mode
> of operation iwcr is used for setup/hold time.
> 
> Signed-off-by: Jett.Zhou <jtzhou@xxxxxxxxxxx>
> Signed-off-by: Yi Zhang <yizhang@xxxxxxxxxxx>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
> Tested-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>

Fixed this checkpatch warning:

CHECK: Please don't use multiple blank lines
#82: FILE: drivers/i2c/busses/i2c-pxa.c:157:
+
+

and applied to for-next, thanks!

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux