Re: [PATCH 2/3] i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2015-10-23 6:06 GMT+09:00 Wolfram Sang <wsa@xxxxxxxxxxxxx>:
> On Thu, Jul 30, 2015 at 05:12:21PM +0900, Masahiro Yamada wrote:
>> Add support for on-chip I2C controller used on newer UniPhier SoCs
>> such as PH1-Pro4, PH1-Pro5, etc.  This adapter is equipped with
>> 8-depth TX/RX FIFOs.
>>
>> Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
>
> Same comments as for the other driver.

Fixed in v2.

> And quite some debug messages left. Could you check if you still want
> them or if they were mostly useful during development of the driver?

Yes, I want to keep them.  I do not think they are too much.


I will probably come back to these drivers when I find some time
in order to implement further features such as the slave mode.   :)

dev_dbg() might be useful for the new development
as well as for checking something when hardware went wrong for some reason.


-- 
Best Regards
Masahiro Yamada
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux