From: Liguo Zhang <liguo.zhang@xxxxxxxxxxxx>
Reset i2c dma engine in hw init function.
When occur i2c ack error, mtk_i2c_irq may is twice,
first is the ack error interrupt, then the complete interrupt,
so i2c->irq_stat need keep the two interrupt value, and only
call complete() for the complete interrupt.
Signed-off-by: Liguo Zhang <liguo.zhang@xxxxxxxxxxxx>
Signed-off-by: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-mt65xx.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 9920eef..57d11b7 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -59,6 +59,7 @@
#define I2C_DMA_START_EN 0x0001
#define I2C_DMA_INT_FLAG_NONE 0x0000
#define I2C_DMA_CLR_FLAG 0x0000
+#define I2C_DMA_HARD_RST 0x0002
#define I2C_DEFAULT_SPEED 100000 /* hz */
#define MAX_FS_MODE_SPEED 400000
@@ -81,6 +82,7 @@ enum DMA_REGS_OFFSET {
OFFSET_INT_FLAG = 0x0,
OFFSET_INT_EN = 0x04,
OFFSET_EN = 0x08,
+ OFFSET_RST = 0x0c,
OFFSET_CON = 0x18,
OFFSET_TX_MEM_ADDR = 0x1c,
OFFSET_RX_MEM_ADDR = 0x20,
@@ -262,6 +264,10 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
writew(control_reg, i2c->base + OFFSET_CONTROL);
writew(I2C_DELAY_LEN, i2c->base + OFFSET_DELAY_LEN);
+
+ writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST);
+ udelay(50);
+ writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
}
/*
@@ -550,16 +556,20 @@ err_exit:
static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id)
{
struct mtk_i2c *i2c = dev_id;
- u16 restart_flag = 0;
+ u16 intr_stat = 0;
- if (i2c->dev_comp->auto_restart)
- restart_flag = I2C_RS_TRANSFER;
+ intr_stat = readw(i2c->base + OFFSET_INTR_STAT);
+ writew(intr_stat, i2c->base + OFFSET_INTR_STAT);
- i2c->irq_stat = readw(i2c->base + OFFSET_INTR_STAT);
- writew(restart_flag | I2C_HS_NACKERR | I2C_ACKERR
- | I2C_TRANSAC_COMP, i2c->base + OFFSET_INTR_STAT);
+ /*
+ * when occurs i2c ack error, mtk_i2c_irq is called twice,
+ * first is the ack error interrupt, then the complete interrupt,
+ * i2c->irq_stat need keep the two interrupt value.
+ */
+ i2c->irq_stat |= intr_stat;
- complete(&i2c->msg_complete);
+ if (i2c->irq_stat & I2C_TRANSAC_COMP)
+ complete(&i2c->msg_complete);
return IRQ_HANDLED;
}
@@ -729,3 +739,4 @@ module_platform_driver(mtk_i2c_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MediaTek I2C Bus Driver");
MODULE_AUTHOR("Xudong Chen <xudong.chen@xxxxxxxxxxxx>");
+MODULE_AUTHOR("Liguo Zhang <liguo.zhang@xxxxxxxxxxxx>");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
