Hi Sifan,
On Mon, Jul 27, 2015 at 12:47:14PM +0100, Sifan Naeem wrote:
> The code to read from the master read fifo, and write to the master
> write fifo, checks a bit in an SCB register before every byte to
> ensure that the fifo is not full (write fifo) or empty (read fifo).
> Due to clock domain crossing inside the SCB block the updated value
> of this bit is only visible after 2 cycles.
>
> The scb_wr_rd_fence() function does 2 dummy writes (to the read-only
> revision register), and it's called before reading from or writing to the
> fifos to ensure that subsequent reads of the fifo status bits do not read
> stale values.
>
> As the 2 dummy writes are required in all versions of the ip, the version
> check is dropped.
Is it anticipated that a future version of the hardware will probably
resolve the clock domain crossing issue? If so fine, but if not its
probably worth removing need_wr_rd_fence.
>
> Fixes: 27bce4 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver")
I believe 12 digits of SHA1 is recommended now, to avoid collisions. I
suggest doing this:
$ git config --global core.abbrev 12
> Signed-off-by: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
> Cc: Stable kernel (v3.19+) <stable@xxxxxxxxxxxxxxx>
That's a fairly non-conventional way to specify stable versions. The
recommended way to Cc stable according to
Documentation/stable_kernel_rules.txt is more like this:
Cc: <stable@xxxxxxxxxxxxxxx> # 3.19.x-
Patch looks fine though
Acked-by: James Hogan <james.hogan@xxxxxxxxxx>
Thanks
James
> ---
> drivers/i2c/busses/i2c-img-scb.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
> index 00ffd66..5c3c615 100644
> --- a/drivers/i2c/busses/i2c-img-scb.c
> +++ b/drivers/i2c/busses/i2c-img-scb.c
> @@ -278,8 +278,6 @@
> #define ISR_COMPLETE(err) (ISR_COMPLETE_M | (ISR_STATUS_M & (err)))
> #define ISR_FATAL(err) (ISR_COMPLETE(err) | ISR_FATAL_M)
>
> -#define REL_SOC_IP_SCB_2_2_1 0x00020201
> -
> enum img_i2c_mode {
> MODE_INACTIVE,
> MODE_RAW,
> @@ -1120,10 +1118,8 @@ static int img_i2c_init(struct img_i2c *i2c)
> return -EINVAL;
> }
>
> - if (rev == REL_SOC_IP_SCB_2_2_1) {
> - i2c->need_wr_rd_fence = true;
> - dev_info(i2c->adap.dev.parent, "fence quirk enabled");
> - }
> + /* Fencing enabled by default. */
> + i2c->need_wr_rd_fence = true;
>
> bitrate_khz = i2c->bitrate / 1000;
> clk_khz = clk_get_rate(i2c->scb_clk) / 1000;
> --
> 1.7.9.5
>
Attachment:
signature.asc
Description: Digital signature
