We can mark the transfer as complete without waiting for the stop bit. This is important when handling repeated start transfers as we have to start the next transfer without the stop bit being issued. Signed-off-by: Sifan Naeem <sifan.naeem@xxxxxxxxxx> --- drivers/i2c/busses/i2c-img-scb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index 24b09fe..e27c3e0 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -903,8 +903,11 @@ static unsigned int img_i2c_auto(struct img_i2c *i2c, if (i2c->msg.flags & I2C_M_RD) { if (int_status & INT_FIFO_FULL_FILLING) { img_i2c_read_fifo(i2c); - if (i2c->msg.len == 0) - return ISR_WAITSTOP; + if (i2c->msg.len == 0) { + if (i2c->last_msg) + return ISR_WAITSTOP; + return ISR_COMPLETE(0); + } } } else { if (int_status & INT_FIFO_EMPTY_EMPTYING) { -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html