Re: [PATCH 1/2] i2c: add SMBus Host Notify support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jean,

On Jun 29 2015 or thereabouts, Jean Delvare wrote:
> Hi Benjamin,
> 
> On Tue, 23 Jun 2015 14:58:18 -0400, Benjamin Tissoires wrote:
> > SMBus Host Notify allows a slave device to act as a master on a bus to
> > notify the host of an interrupt. The functionality is directly implemented
> > in the firmware so we just export a toggle function and rely on the
> > adapter to actually support this.
> 
> Why does it need to be toggled? I mean, if the controller supports it,
> why don't we just enable the feature all the time?

That is definitively a solution. I however had once a problem with
suspend/resume where i2c_i801 was not able to reset the Host Notify
feature, but that was maybe a side effect of unloading/reloading the
module tons of times during the session.

I will work on that and submit a v2 this week.

I still wonder if you think we should expose a KConfig parameter for
this or not. I would prefer not to (because it is handled in hardware
and people might screw up their input drivers), but I'd prefer have your
opinion on this first.

> 
> > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
> > ---
> >  Documentation/i2c/smbus-protocol |  4 ++++
> >  drivers/i2c/i2c-core.c           | 26 ++++++++++++++++++++++++++
> >  include/linux/i2c.h              |  8 ++++++++
> >  include/uapi/linux/i2c.h         |  1 +
> >  4 files changed, 39 insertions(+)
> > 
> > diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol
> > index 6012b12..af4e4b9 100644
> > --- a/Documentation/i2c/smbus-protocol
> > +++ b/Documentation/i2c/smbus-protocol
> > @@ -199,6 +199,10 @@ alerting device's address.
> >  
> >  [S] [HostAddr] [Wr] A [DevAddr] A [DataLow] A [DataHigh] A [P]
> >  
> > +I2C drivers for devices which can trigger SMBus Host Notify should call
> > +i2c_smbus_toggle_host_notify() to enable SMBUS Host Notify on the adapter
> > +and implement the optional alert() callback.
> > +
> >  
> >  Packet Error Checking (PEC)
> >  ===========================
> > diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> > index 987c124..eaaf5b0 100644
> > --- a/drivers/i2c/i2c-core.c
> > +++ b/drivers/i2c/i2c-core.c
> > @@ -2959,6 +2959,32 @@ int i2c_slave_unregister(struct i2c_client *client)
> >  EXPORT_SYMBOL_GPL(i2c_slave_unregister);
> >  #endif
> >  
> > +int i2c_smbus_toggle_host_notify(struct i2c_client *client, bool state)
> > +{
> > +	int ret;
> > +
> > +	if (!client)
> > +		return -EINVAL;
> > +
> > +	if (!(client->flags & I2C_CLIENT_TEN)) {
> > +		/* Enforce stricter address checking */
> > +		ret = i2c_check_addr_validity(client->addr);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	if (!client->adapter->algo->toggle_smbus_host_notify)
> > +		return -EOPNOTSUPP;
> > +
> > +	i2c_lock_adapter(client->adapter);
> > +	ret = client->adapter->algo->toggle_smbus_host_notify(client->adapter,
> > +							      state);
> > +	i2c_unlock_adapter(client->adapter);
> > +
> > +	return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(i2c_smbus_toggle_host_notify);
> > +
> 
> As this is an SMBus feature, can't it go to drivers/i2c/i2c-smbus.c?

I asked myself this question, and I figured it was not possible because
i2c-smbus consists in the smbus_alert i2c driver.

After re-reading the code, I see now that it could definitively goes
there too. However, if we choose not to expose the toggle to the
drivers, then there will be no need to make deep changes in i2c-smbus
:).

> 
> >  MODULE_AUTHOR("Simon G. Vogl <simon@xxxxxxxxxxxxxxxxx>");
> >  MODULE_DESCRIPTION("I2C-Bus main module");
> >  MODULE_LICENSE("GPL");
> > diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> > index e83a738..7ffc970 100644
> > --- a/include/linux/i2c.h
> > +++ b/include/linux/i2c.h
> > @@ -177,6 +177,8 @@ struct i2c_driver {
> >  	 * The format and meaning of the data value depends on the protocol.
> >  	 * For the SMBus alert protocol, there is a single bit of data passed
> >  	 * as the alert response's low bit ("event flag").
> > +	 * For the SMBus Host Notify protocol, the data corresponds to the
> > +	 * 16-bits payload data reported by the external device.
> 
> 16-bit (no s)

ack

> 
> >  	 */
> >  	void (*alert)(struct i2c_client *, unsigned int data);
> >  
> > @@ -270,6 +272,9 @@ static inline int i2c_slave_event(struct i2c_client *client,
> >  }
> >  #endif
> >  
> > +
> 
> No double blank lines in source code please.

oops, sorry.

> 
> > +extern int i2c_smbus_toggle_host_notify(struct i2c_client *client, bool state);
> > +
> >  /**
> >   * struct i2c_board_info - template for device creation
> >   * @type: chip type, to initialize i2c_client.name
> > @@ -378,6 +383,8 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,
> >   *   from the I2C_FUNC_* flags.
> >   * @reg_slave: Register given client to I2C slave mode of this adapter
> >   * @unreg_slave: Unregister given client from I2C slave mode of this adapter
> > + * @toggle_smbus_host_notify: toggle the SMBus Host Notify support of this
> > + *   adapter.
> >   *
> >   * The following structs are for those who like to implement new bus drivers:
> >   * i2c_algorithm is the interface to a class of hardware solutions which can
> > @@ -408,6 +415,7 @@ struct i2c_algorithm {
> >  	int (*reg_slave)(struct i2c_client *client);
> >  	int (*unreg_slave)(struct i2c_client *client);
> >  #endif
> > +	int (*toggle_smbus_host_notify)(struct i2c_adapter *adap, bool state);
> 
> Please put it after u32 (*functionality), so that the field offsets do
> not depend on configuration options.

OK. But again, if we enable it anyway, this will be just removed.

> 
> >  };
> >  
> >  /**
> > diff --git a/include/uapi/linux/i2c.h b/include/uapi/linux/i2c.h
> > index 0e949cb..c72708e 100644
> > --- a/include/uapi/linux/i2c.h
> > +++ b/include/uapi/linux/i2c.h
> > @@ -100,6 +100,7 @@ struct i2c_msg {
> >  #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
> >  #define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
> >  #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
> > +#define I2C_FUNC_SMBUS_HOST_NOTIFY	0x10000000
> >  
> >  #define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
> >  					 I2C_FUNC_SMBUS_WRITE_BYTE)
> 

Thanks for the review!

Cheers,
Benjamin
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux