Re: [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Monday 29 June 2015 02:22 PM, Vaibhav Hiremath wrote:


On Monday 15 June 2015 09:19 PM, Vaibhav Hiremath wrote:
This patch series fixes bugs/warnings, cleans up the code and adds
support for PXA910 family of devices to PXA I2C bus driver.

There has been one attempt made sometime back in 2012 to upstream
some of the patches from below list, but did not get follow up later.
I have consolidated all the patches, cleaned them up, splited into
logical changes, added new patches and submitting it now.

I tried to maintain authorship & Signoff except where I did some
significant changes to the code/logic.

Link to previous post:
http://permalink.gmane.org/gmane.linux.drivers.i2c/13557

Testing:
   - Basic testing on PMIC device on I2C-0 interface
   - Boot tested on platform based on PXA1928
   - Probe is successfully passing
   - Read few registers of PMIC (RTC, ID, etc...) during boot


V1 => V2:
========

Ping !!!


If there are no review comments on this series, can it be merged?

Thanks,
Vaibhav


Thanks,
Vaibhav



Link to V1 -
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/347012.html


   - Fixed all comments from "Robert Jarzmik" and "Wolfram Sang"
   - Dropped Patch
    05/12: using core bus reset implementation - under work.
                Will submit shortly.
    08/12: NAKed and dropped
   - Seperated DT binding patch from driver changes, for easy merge


Leilei Shang (1):
   i2c: pxa: keep i2c irq ON in suspend

Shouming Wang (1):
   i2c: pxa: Return I2C_RETRY when timeout in pio mode

Vaibhav Hiremath (8):
   i2c: pxa: No need to set slave addr for i2c master mode reset
   i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode
   i2c: pxa: Update debug function to dump more info on error
   i2c:pxa: Use devm_ variants in probe function
   Documentation: binding: add new property 'disable_after_xfer' to
     i2c-pxa
   i2c: pxa: Add support for pxa910/988 & new configuration features
   i2c: pxa: Add ILCR (tLow & tHigh) configuration support
   Documentation: binding: add sclk adjustment properties to i2c-pxa

Yi Zhang (1):
   i2c: pxa: enable/disable i2c module across msg xfer

Yipeng Yao (1):
   i2c: pxa: Remove compile warnning in 64bit mode

  Documentation/devicetree/bindings/i2c/i2c-pxa.txt |  18 ++
  drivers/i2c/busses/i2c-pxa.c                      | 267
++++++++++++++++------
  2 files changed, 220 insertions(+), 65 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux