[PATCH] i2c: davinci: Fix bus rate calculation on Keystone SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



According to KeyStone Architecture I2C User Guide,

                         module clock frequency
master clock frequency = ----------------------
                         (ICCL + 6) + (ICCH + 6)

i.e. "d" in i2c_davinci_calc_clk_dividers() should be fixed and
not dependent from module clock prescaler PSC on these SoCs.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
---

RFC: If someone from TI has an idea how to improve the coverage of future Keystone
revisions -- hints/patches are welcome. The current ID check is based on
Davinci/Keystone datasheets and is at least working on real Keystone II.

 drivers/i2c/busses/i2c-davinci.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 4a110af..3d78f6a 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -60,6 +60,8 @@
 #define DAVINCI_I2C_IVR_REG	0x28
 #define DAVINCI_I2C_EMDR_REG	0x2c
 #define DAVINCI_I2C_PSC_REG	0x30
+#define DAVINCI_I2C_ICPID1_REG	0x34
+#define DAVINCI_I2C_ICPID2_REG	0x38
 #define DAVINCI_I2C_FUNC_REG	0x48
 #define DAVINCI_I2C_DIR_REG	0x4c
 #define DAVINCI_I2C_DIN_REG	0x50
@@ -203,6 +205,9 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 	 * where if PSC == 0, d = 7,
 	 *       if PSC == 1, d = 6
 	 *       if PSC > 1 , d = 5
+	 *
+	 * Note:
+	 * d is always 6 on Keystone I2C controller
 	 */

 	/* get minimum of 7 MHz clock, but max of 12 MHz */
@@ -211,6 +216,11 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 		psc++;	/* better to run under spec than over */
 	d = (psc >= 2) ? 5 : 7 - psc;

+	if (davinci_i2c_read_reg(dev, DAVINCI_I2C_ICPID2_REG) == 0x2206) {
+		dev_dbg(dev->dev, "Keystone SoC detected\n");
+		d = 6;
+	}
+
 	clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000));
 	/* Avoid driving the bus too fast because of rounding errors above */
 	if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000)
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux