The patch converts hardcoded numerical constants to a named ones. While here, align the variable name in get_sem() and reset_semaphore(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-designware-baytrail.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c index 5f1ff4c..e9cb355 100644 --- a/drivers/i2c/busses/i2c-designware-baytrail.c +++ b/drivers/i2c/busses/i2c-designware-baytrail.c @@ -22,22 +22,24 @@ #define SEMAPHORE_TIMEOUT 100 #define PUNIT_SEMAPHORE 0x7 +#define PUNIT_SEMAPHORE_BIT BIT(0) +#define PUNIT_SEMAPHORE_ACQUIRE BIT(1) static unsigned long acquired; static int get_sem(struct device *dev, u32 *sem) { - u32 reg_val; + u32 data; int ret; ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ, PUNIT_SEMAPHORE, - ®_val); + &data); if (ret) { dev_err(dev, "iosf failed to read punit semaphore\n"); return ret; } - *sem = reg_val & 0x1; + *sem = data & PUNIT_SEMAPHORE_BIT; return 0; } @@ -52,9 +54,9 @@ static void reset_semaphore(struct device *dev) return; } - data = data & 0xfffffffe; + data &= ~PUNIT_SEMAPHORE_BIT; if (iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE, - PUNIT_SEMAPHORE, data)) + PUNIT_SEMAPHORE, data)) dev_err(dev, "iosf failed to reset punit semaphore during write\n"); } @@ -70,9 +72,9 @@ int baytrail_i2c_acquire(struct dw_i2c_dev *dev) if (!dev->acquire_lock) return 0; - /* host driver writes 0x2 to side band semaphore register */ + /* host driver writes to side band semaphore register */ ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE, - PUNIT_SEMAPHORE, 0x2); + PUNIT_SEMAPHORE, PUNIT_SEMAPHORE_ACQUIRE); if (ret) { dev_err(dev->dev, "iosf punit semaphore request failed\n"); return ret; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html