Hi
On 02/09/2015 06:35 PM, Nicholas Mc Guire wrote:
return type of wait_for_completion_timeout is unsigned long not int.
An appropriate return variable is introduced and assignment fixed up.
Signed-off-by: Nicholas Mc Guire <hofrat@xxxxxxxxx>
---
Patch was compile tested with x86_64_defconfig +
CONFIG_X86_AMD_PLATFORM_DEVICE=y, CONFIG_I2C_DESIGNWARE_PLATFORM=m
(implies CONFIG_I2C_DESIGNWARE_CORE=y)
Patch is against 3.19.0-rc7 (localversion-next is -next-20150209)
drivers/i2c/busses/i2c-designware-core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 6e25c01..05934e0 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -623,6 +623,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
int ret;
+ unsigned int timeout;
Not unsigned long.
@@ -656,8 +657,8 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
i2c_dw_xfer_init(dev);
/* wait for tx to complete */
- ret = wait_for_completion_timeout(&dev->cmd_complete, HZ);
- if (ret == 0) {
+ timeout = wait_for_completion_timeout(&dev->cmd_complete, HZ);
+ if (timeout == 0) {
dev_err(dev->dev, "controller timed out\n");
/* i2c_dw_init implicitly disables the adapter */
i2c_dw_init(dev);
I'd say better to test directly with "if
(!wait_for_completion_timeout())" since remaining jiffies or potential
error code from wait_for_completion_timeout() is not used here.
--
Jarkko
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
