[PATCH v2] i2c: img-scb: fixup of wait_for_completion_timeout return handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Return type of wait_for_completion_timeout is unsigned long not int. 
Appropriately typed/named variable are added and assignment fixed up.

Signed-off-by: Nicholas Mc Guire <hofrat@xxxxxxxxx>
---

v2: int ret is an idiom - thus rather than just changing the type, rename
    the variable, as suggested by Wolfram Sang <wsa@xxxxxxxxxxxxx>.

Patch was compile tested with x86_64_defconfig + CONFIG_COMPILE_TEST=y
CONFIG_I2C_IMG=m

Patch is against 3.19.0-rc7 (localversion-next is -next-20150209)

 drivers/i2c/busses/i2c-img-scb.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 0fcc169..6e4e990 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -988,15 +988,16 @@ out:
 static int img_i2c_reset_bus(struct img_i2c *i2c)
 {
 	unsigned long flags;
-	int ret;
+	unsigned long timeout;
 
 	spin_lock_irqsave(&i2c->lock, flags);
 	reinit_completion(&i2c->msg_complete);
 	img_i2c_reset_start(i2c);
 	spin_unlock_irqrestore(&i2c->lock, flags);
 
-	ret = wait_for_completion_timeout(&i2c->msg_complete, IMG_I2C_TIMEOUT);
-	if (ret == 0)
+	timeout = wait_for_completion_timeout(&i2c->msg_complete,
+					      IMG_I2C_TIMEOUT);
+	if (timeout == 0)
 		return -ETIMEDOUT;
 	return 0;
 }
@@ -1007,6 +1008,7 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	struct img_i2c *i2c = i2c_get_adapdata(adap);
 	bool atomic = false;
 	int i, ret;
+	unsigned long timeout;
 
 	if (i2c->mode == MODE_SUSPEND) {
 		WARN(1, "refusing to service transaction in suspended state\n");
@@ -1068,11 +1070,11 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 			img_i2c_write(i2c);
 		spin_unlock_irqrestore(&i2c->lock, flags);
 
-		ret = wait_for_completion_timeout(&i2c->msg_complete,
-						  IMG_I2C_TIMEOUT);
+		timeout = wait_for_completion_timeout(&i2c->msg_complete,
+						      IMG_I2C_TIMEOUT);
 		del_timer_sync(&i2c->check_timer);
 
-		if (ret == 0) {
+		if (timeout == 0) {
 			dev_err(adap->dev.parent, "i2c transfer timed out\n");
 			i2c->msg_status = -ETIMEDOUT;
 			break;
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux