On Wed, Jan 7, 2015 at 12:09 AM, Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx> wrote:
> CM3232 is an advanced ambient light sensor with I2C protocol interface.
> The I2C slave address is internally hardwired as 0x10 (7-bit). Writing
> to configure register is byte mode, but reading ALS register requests to
> use word mode for 16-bit resolution.
>
> v2:
> Removed unused CM3232_CMD_ALS_HS.
> Modified cm3232_als_info structure. Removed id field.
> Modified cm3232_chip structure.
> Merged CM3232_als_it_bits and CM3232_als_it_values to cm3232_it_scale.
> Removed mutex lock.
> Renamed als_raw to regs_als. Moved it to cm3232_chip structure.
> Modified cm3232_read_als_it() and cm3232_write_als_it() to support val2.
>
> Thanks comments from Jeremiah Mahler, Peter Meerwald, Daniel Baluta,
> and Joe Perches.
>
> v1:
> Added cm3232.c to support Capella Microsystems CM3232 Ambient Light
> Sensor.
>
Usually, we keep history out of the commit message - below the scissor line.
> Signed-off-by: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
> ---
<here is the place for adding changes since last versions>
> .../devicetree/bindings/i2c/trivial-devices.txt | 1 +
> MAINTAINERS | 6 +
> drivers/iio/light/Kconfig | 11 +
> drivers/iio/light/Makefile | 1 +
> drivers/iio/light/cm3232.c | 411 +++++++++++++++++++++
> 5 files changed, 430 insertions(+)
> create mode 100644 drivers/iio/light/cm3232.c
>
> diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
> index 9f4e382..572a7c4 100644
> --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
> +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
> @@ -34,6 +34,7 @@ atmel,24c512 i2c serial eeprom (24cxx)
> atmel,24c1024 i2c serial eeprom (24cxx)
> atmel,at97sc3204t i2c trusted platform module (TPM)
> capella,cm32181 CM32181: Ambient Light Sensor
> +capella,cm3232 CM3232: Ambient Light Sensor
> catalyst,24c32 i2c serial eeprom
> cirrus,cs42l51 Cirrus Logic CS42L51 audio codec
> dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ddb9ac8..06a613a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2378,6 +2378,12 @@ F: security/capability.c
> F: security/commoncap.c
> F: kernel/capability.c
>
> +CAPELLA MICROSYSTEMS LIGHT SENSOR DRIVER
> +M: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
> +S: Maintained
> +F: drivers/iio/light/cm*
> +F: Documentation/devicetree/bindings/i2c/trivial-devices.txt
> +
> CC2520 IEEE-802.15.4 RADIO DRIVER
> M: Varka Bhadram <varkabhadram@xxxxxxxxx>
> L: linux-wpan@xxxxxxxxxxxxxxx
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index 5bea821..cd5028e 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -48,6 +48,17 @@ config CM32181
> To compile this driver as a module, choose M here:
> the module will be called cm32181.
>
> +config CM3232
> + depends on I2C
> + tristate "CM3232 ambient light sensor"
> + help
> + Say Y here if you use cm3232.
> + This option enables ambient light sensor using
> + Capella Microsystems cm3232 device driver.
> +
> + To compile this driver as a module, choose M here:
> + the module will be called cm3232.
> +
> config CM36651
> depends on I2C
> tristate "CM36651 driver"
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index 47877a3..f2c8d55 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_ADJD_S311) += adjd_s311.o
> obj-$(CONFIG_AL3320A) += al3320a.o
> obj-$(CONFIG_APDS9300) += apds9300.o
> obj-$(CONFIG_CM32181) += cm32181.o
> +obj-$(CONFIG_CM3232) += cm3232.o
> obj-$(CONFIG_CM36651) += cm36651.o
> obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o
> obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
> diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c
> new file mode 100644
> index 0000000..b4b7d1b
> --- /dev/null
> +++ b/drivers/iio/light/cm3232.c
> @@ -0,0 +1,411 @@
> +/*
> + * CM3232 Ambient Light Sensor
> + *
> + * Copyright (C) 2014-2015 Capella Microsystems Inc.
> + * Author: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2, as published
> + * by the Free Software Foundation.
> + *
> + * IIO driver for CM3232 (7-bit I2C slave address 0x10).
> + *
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/events.h>
Why do you need to include events.h?
> +#include <linux/init.h>
> +
> +/* Registers Address */
> +#define CM3232_REG_ADDR_CMD 0x00
> +#define CM3232_REG_ADDR_ALS 0x50
> +#define CM3232_REG_ADDR_ID 0x53
> +
> +/* CMD register */
> +#define CM3232_CMD_ALS_DISABLE BIT(0)
> +
> +#define CM3232_CMD_ALS_IT_SHIFT 2
> +#define CM3232_CMD_ALS_IT_MASK (0x07 << CM3232_CMD_ALS_IT_SHIFT)
> +#define CM3232_CMD_ALS_IT_DEFAULT (0x01 << CM3232_CMD_ALS_IT_SHIFT)
> +
> +#define CM3232_CMD_ALS_RESET BIT(6)
Use only one space between define and CM3232_ ...
> +
> +#define CM3232_CMD_DEFAULT CM3232_CMD_ALS_IT_DEFAULT
> +
> +#define CM3232_HW_ID 0x32
> +#define CM3232_CALIBSCALE_DEFAULT 100000
> +#define CM3232_CALIBSCALE_RESOLUTION 100000
> +#define CM3232_MLUX_PER_LUX 1000
> +
> +#define CM3232_MLUX_PER_BIT_DEFAULT 64
> +#define CM3232_MLUX_PER_BIT_BASE_IT 100000
> +
> +struct cm3232_it_scale {
> + int val;
> + int val2;
> + u8 it;
> +};
> +
> +static const struct cm3232_it_scale cm3232_als_it_scales[] = {
> + {0, 100000, 0}, /* 0.100000 */
> + {0, 200000, 1}, /* 0.200000 */
> + {0, 400000, 2}, /* 0.400000 */
> + {0, 800000, 3}, /* 0.800000 */
> + {1, 600000, 4}, /* 1.600000 */
> + {3, 200000, 5}, /* 3.200000 */
> +};
> +
> +struct cm3232_als_info {
> + u8 regs_cmd_default;
> + int calibscale;
> + int mlux_per_bit;
> + int mlux_per_bit_base_it;
> +};
> +
> +static struct cm3232_als_info cm3232_als_info_default = {
> + .regs_cmd_default = CM3232_CMD_DEFAULT,
> + .calibscale = CM3232_CALIBSCALE_DEFAULT,
> + .mlux_per_bit = CM3232_MLUX_PER_BIT_DEFAULT,
> + .mlux_per_bit_base_it = CM3232_MLUX_PER_BIT_BASE_IT,
> +};
> +
> +struct cm3232_chip {
> + struct i2c_client *client;
> + struct cm3232_als_info *als_info;
> + u8 regs_cmd;
> + u16 regs_als;
> +};
> +
> +static int cm3232_get_lux(struct cm3232_chip *chip);
> +static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2);
> +
> +/**
> + * cm3232_reg_init() - Initialize CM3232
> + * @chip: pointer of struct cm3232.
> + *
> + * Check and initialize CM3232 ambient light sensor.
> + *
> + * Return: 0 for success; otherwise for error code.
> + */
> +static int cm3232_reg_init(struct cm3232_chip *chip)
> +{
> + struct i2c_client *client = chip->client;
> + s32 ret;
> +
> + chip->als_info = &cm3232_als_info_default;
> +
> + /* Identify device */
> + ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ID);
> + if (ret < 0)
> + return ret;
> + if ((ret & 0xFF) != CM3232_HW_ID)
> + return -ENODEV;
> +
> + /* Disable and reset device */
> + chip->regs_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET;
> + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
> + chip->regs_cmd);
> + if (ret < 0)
> + return ret;
> +
> + /* Register default value */
> + chip->regs_cmd = chip->als_info->regs_cmd_default;
> +
> + /* Configure register */
> + ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
> + chip->regs_cmd);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +/**
> + * cm3232_read_als_it() - Get sensor integration time
> + * @chip: pointer of struct cm3232
> + * @val: pointer of int to load the integration (sec).
> + * @val2: pointer of int to load the integration time (microsecond).
> + *
> + * Report the current integration time.
> + *
> + * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
> + */
> +static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2)
> +{
> + u16 als_it;
> + int i;
> +
> + als_it = chip->regs_cmd;
> + als_it &= CM3232_CMD_ALS_IT_MASK;
> + als_it >>= CM3232_CMD_ALS_IT_SHIFT;
> + for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
> + if (als_it == cm3232_als_it_scales[i].it) {
> + *val = cm3232_als_it_scales[i].val;
> + *val2 = cm3232_als_it_scales[i].val2;
> + return IIO_VAL_INT_PLUS_MICRO;
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> +/**
> + * cm3232_write_als_it() - Write sensor integration time
> + * @chip: pointer of struct cm3232.
> + * @val: integration time in second.
> + * @val2: integration time in microsecond.
> + *
> + * Convert integration time to sensor value.
> + *
> + * Return: i2c_smbus_write_byte_data command return value.
> + */
> +static int cm3232_write_als_it(struct cm3232_chip *chip, int val, int val2)
> +{
> + struct i2c_client *client = chip->client;
> + u16 als_it;
> + int i;
> + s32 ret;
> +
> + for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
> + if (val == cm3232_als_it_scales[i].val &&
> + val2 == cm3232_als_it_scales[i].val2) {
> +
> + als_it = cm3232_als_it_scales[i].it;
> + als_it <<= CM3232_CMD_ALS_IT_SHIFT;
> +
> + chip->regs_cmd &= ~CM3232_CMD_ALS_IT_MASK;
> + chip->regs_cmd |= als_it;
> + ret = i2c_smbus_write_byte_data(client,
> + CM3232_REG_ADDR_CMD,
> + chip->regs_cmd);
> + if (ret < 0)
> + return ret;
I see one problem here. If I2C write fails, you will still end up with
an updated
value of chip->regs_cmd. Then, a user reading integration time will get invalid
information.
> +
> + return 0;
> + }
> + }
> + return -ERANGE;
> +}
> +
> +/**
> + * cm3232_get_lux() - report current lux value
> + * @chip: pointer of struct cm3232.
> + *
> + * Convert sensor data to lux. It depends on integration
> + * time and calibscale variable.
Would you care to add more details on how sensor data is converted to lux.
Reading the code its not very clear for me.
Explaining the following macros CM3232_CALIBSCALE_DEFAULT,
CM3232_CALIBSCALE_RESOLUTION, CM3232_MLUX_PER_BIT_DEFAULT,
CM3232_MLUX_PER_BIT_BASE_IT will do it.
> +
> + *
> + * Return: Zero or positive value is lux, otherwise error code.
> + */
> +static int cm3232_get_lux(struct cm3232_chip *chip)
> +{
> + struct i2c_client *client = chip->client;
> + struct cm3232_als_info *als_info = chip->als_info;
> + int ret;
> + struct cm3232_it_scale scale;
> + int als_it;
> + u64 lux;
> +
> + /* Calculate mlux per bit based on als_it */
> + ret = cm3232_read_als_it(chip, &scale.val, &scale.val2);
> + if (ret < 0)
> + return -EINVAL;
> + als_it = scale.val * 1000000 + scale.val2;
> + lux = (__force u64)als_info->mlux_per_bit;
> + lux *= als_info->mlux_per_bit_base_it;
> + lux = div_u64(lux, als_it);
> +
> + ret = i2c_smbus_read_word_data(
> + client,
> + CM3232_REG_ADDR_ALS);
> + if (ret < 0)
> + return ret;
> +
> + chip->regs_als = (u16)ret;
> + lux *= chip->regs_als;
> + lux *= als_info->calibscale;
> + lux = div_u64(lux, CM3232_CALIBSCALE_RESOLUTION);
> + lux = div_u64(lux, CM3232_MLUX_PER_LUX);
> +
> + if (lux > 0xFFFF)
> + lux = 0xFFFF;
> +
> + return (int)lux;
> +}
> +
> +static int cm3232_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct cm3232_chip *chip = iio_priv(indio_dev);
> + struct cm3232_als_info *als_info = chip->als_info;
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_PROCESSED:
> + ret = cm3232_get_lux(chip);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_CALIBSCALE:
> + *val = als_info->calibscale;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_INT_TIME:
> + *val = 0;
> + return cm3232_read_als_it(chip, val, val2);
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int cm3232_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct cm3232_chip *chip = iio_priv(indio_dev);
> + struct cm3232_als_info *als_info = chip->als_info;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_CALIBSCALE:
> + als_info->calibscale = val;
> + return val;
> + case IIO_CHAN_INFO_INT_TIME:
> + return cm3232_write_als_it(chip, val, val2);
> + }
> +
> + return -EINVAL;
> +}
> +
> +/**
> + * cm3232_get_it_available() - Get available ALS IT value
> + * @dev: pointer of struct device.
> + * @attr: pointer of struct device_attribute.
> + * @buf: pointer of return string buffer.
> + *
> + * Display the available integration time in second.
> + *
> + * Return: string length.
> + */
> +static ssize_t cm3232_get_it_available(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int i, len;
> +
> + for (i = 0, len = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++)
> + len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
> + cm3232_als_it_scales[i].val,
> + cm3232_als_it_scales[i].val2);
> + return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
> +}
> +
> +static const struct iio_chan_spec cm3232_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .info_mask_separate =
> + BIT(IIO_CHAN_INFO_PROCESSED) |
> + BIT(IIO_CHAN_INFO_CALIBSCALE) |
> + BIT(IIO_CHAN_INFO_INT_TIME),
> + }
> +};
> +
> +static IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
> + S_IRUGO, cm3232_get_it_available, NULL, 0);
> +
> +static struct attribute *cm3232_attributes[] = {
> + &iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group cm3232_attribute_group = {
> + .attrs = cm3232_attributes
> +};
> +
> +static const struct iio_info cm3232_info = {
> + .driver_module = THIS_MODULE,
> + .read_raw = &cm3232_read_raw,
> + .write_raw = &cm3232_write_raw,
> + .attrs = &cm3232_attribute_group,
> +};
> +
> +static int cm3232_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct cm3232_chip *chip;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + chip = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + chip->client = client;
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->channels = cm3232_channels;
> + indio_dev->num_channels = ARRAY_SIZE(cm3232_channels);
> + indio_dev->info = &cm3232_info;
> + if (id && id->name)
> + indio_dev->name = id->name;
> + else
> + indio_dev->name = (char *)dev_name(&client->dev);
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = cm3232_reg_init(chip);
> + if (ret) {
> + dev_err(&client->dev,
> + "%s: register init failed\n",
> + __func__);
> + return ret;
> + }
> +
> + return iio_device_register(indio_dev);
> +}
> +
> +static int cm3232_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> +
> + i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
> + CM3232_CMD_ALS_DISABLE);
> +
> + iio_device_unregister(indio_dev);
> + return 0;
> +}
> +
> +static const struct i2c_device_id cm3232_id[] = {
> + {"cm3232", 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, cm3232_id);
> +
> +static const struct of_device_id cm3232_of_match[] = {
> + {.compatible = "capella,cm3232"},
> + {}
> +};
> +
> +static struct i2c_driver cm3232_driver = {
> + .driver = {
> + .name = "cm3232",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(cm3232_of_match),
> + },
> + .id_table = cm3232_id,
> + .probe = cm3232_probe,
> + .remove = cm3232_remove,
> +};
> +
> +module_i2c_driver(cm3232_driver);
> +
> +MODULE_AUTHOR("Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("CM3232 ambient light sensor driver");
> +MODULE_LICENSE("GPL");
> --
> 1.8.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
