Re: [PATCH 2/3] i2c/at91: add support for system PM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Wenyou Yang <wenyou.yang@xxxxxxxxx> writes:

Add a changelog here describing what you're doing, and why.

> Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-at91.c |   30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
> index 03b9f48..8f408f8 100644
> --- a/drivers/i2c/busses/i2c-at91.c
> +++ b/drivers/i2c/busses/i2c-at91.c
> @@ -845,6 +845,35 @@ static int at91_twi_remove(struct platform_device *pdev)
>  }
>  
>  #ifdef CONFIG_PM
> +#ifdef CONFIG_PM_SLEEP
> +static int at91_twi_suspend(struct device *dev)
> +{
> +	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
> +
> +	if (!pm_runtime_suspended(dev))
> +		clk_disable_unprepare(twi_dev->clk);

I would just call at91_twi_runtime_suspend() here.

Then, if you need to add additional steps, you only have to add them in
once place.  This also makes it obvious that ->suspend and
->runtime_suspend are doing the exact same thing.

NOTE: you'll need to wrap the runtime_suspend|resume functions in just
CONFIG_PM instead of CONFIG_PM_RUNTIME for this to work.

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux